I have completed an initial new port of systemd to musl. This patch set does not share much in common with the existing OpenEmbedded patchset. I wanted to make a fully updated patch series targeting more current releases of systemd and musl, taking advantage of the latest features and updates in both. I also took a focus on writing patches that could be sent for consideration of inclusion upstream.

The final result is a system that appears to be surprisingly reliable considering the newness of the port, and very fast to boot.

...

And that is how I became the first person alive to see systemd passing its entire test suite on a big-endian 64-bit PowerPC musl libc system.

...

While the system works really well, and boots in 1/3rd the time of OpenRC on the same system, it isn’t ready for prime time just yet.

...

There aren’t any service unit files written or packaged yet, other than OpenSSH and utmps. We are working with our sponsor on an effort to add -systemd split packages to any of the packages with -openrc splits. We should be able to rely on upstream units where present, and lean on Gentoo and Fedora’s systemd experts to have good base files to reference when needed. I’ve already landed support for this in abuild.

This work is part of Adélie Linux

cross-posted from: https://lemmy.zip/post/22209812

My school uses EAP for its student WiFi, but there's no option for "EAP" security (PEAP, LEAP and every other option in KDE's WiFi security settings wouldn't connect). I'm pretty sure there was an option for EAP on Linux Lite (my previous OS before kinoite) which connected successfully. Is it possible to use EAP in Kinoite, and how do I enable/use it?

So you may have heard of the install gentoo meme, when I looked the guidebook I thought it looked a little complex like with Arch.

Does Gentoo have something special that other distros do not? Apparently you can use the USE FLAGS to determine what stuff you want and it's meant to be even more lean on resources.

Isn't there a Gentoo installer like with Arch? With Arch I can confidently just run the installer on a VM but I got stuck with Gentoo

Update: I managed to get it working with the answers from @Max_P@lemmy.max-p.me and this link:

https://www.zdnet.com/article/how-to-permanently-mount-a-drive-in-linux-and-why-you-should/

I've just installed Mint 22 on my laptop, and I've got two storage drives alongside my main drive. I want these drives to be available to all users on boot, and to be readable and writable. At the moment they're treated as removable drives, and are mounted under the individual user. As a result, any permissions that I'm setting as the owner are not sticking when they're mounted by another user.

The first drive is synced with my main PC through Syncthing, and is synced to Onedrive from there. The second drive is my music, podcasts, and audiobooks, which are all synced through Syncthing only. I'm the only person using the laptop and accessing any of these files, so I'm not bothered about the wrong user accidentally opening them.

I've read some posts about editing fstab to mount them at startup, but they don't cover whether the drives will be available to other users or not. Can I just add them to fstab and mount them somewhere that's available to all users, then sort out the permissions? If so, where's the best place to put them?

Thanks in advance :)

So I'm building a new computer before the end of the year and lemmy is obviously pushing me towards Linux.

I am not computer savvy, I have a family member that will help me set up my PC, but I do not want to be calling/messaging them every day when I want to open a program.

Basically my question comes down to: can I operate a Linux PC these days without needing to troubleshoot or type code.

I use my computer about once a week for a few hours I would say, so any time spent troubleshooting is time wasted.

Thanks!

EDIT: since a lot of people are asking what programs I typically use, I'll just list my most used programs.

Word, Excel, ect(I'm fine with alternatives)

Spotify

Gimp (would have been a make or break, so I'm glad it's supported)

Brave browser (browser is a browser)

Steam

Discord

I would say that while I could figure out how the kernels work, I'm at a point with computers these days where I don't have the time. My priorities fall with a seamless daily experience. If I have the time to figure something out I can, but ideally my day to day usage being unbotherd is what I'm after.

A lot of the comments so far have been helpful! I'm definitely going to give Linux a fair shot with my new build, probably start with Mint.

SUSE just open-sourced a typeface :)

For those unfamiliar with it, power-profiles-daemon is a low-level component to provide power handling over DBus. Ever used the Power Mode options in the Quick Settings menu in GNOME Shell? Those options interface through this.

From 0.22 Release Notes:

Since this release power-profiles-daemon is also battery-level aware and some drivers use this value to be smarter at tuning their optimizations. In particular both the AMD panel power action now uses a progressive approach, changing the the ABM based on the battery percentage.

AMD p-state received various features and improvements:

• it supports core performance boost when not in power-saver mode.
• uses minimum frequency to lowest non-linear frequency
• it is more impervious to faulty firmware and kernel bugs

This should be included in the upcoming Ubuntu 24.10 release.

I'm have some trouble on how to get Jellyfin running on Ubuntu server. I'm Very new to using Linux with the command line so please be patient with me.

i have tried to Duck(duckgo) a solution but i cant find anything that works for me.

If you need some kind of logs please tell me how to get them!

// A very lost linux noob

Linux people doing Linux things, it seems.

Situation: we live in europe, there's PRISM and Privacy Shield and all that, to which selfhosting is the solution. Now, my sister, mostly on Apple, got concerned with all the hacks and privacy violations over the years. She's a tech noob, so i can't really recommend her prism-break.org

There's a bunch of hosted solutions geared towards small to medium business, like Univention Corporate Server, NethServer, etc.

Are there similiar bundles for private use, basically Apple cloud alternative? With services like cloud storage, cloud office, media share, maybe chat, videocall?

Or should i let her wait until i got my box up, VPN her over? I'm only semi-professional tho.

i started using micro and its pretty great. but when i try to open the terminal within the editor 

ctl+e

it seems to just open a whole new terminal window with no context within my document.

anybody got ideas?

Hi folks, I'm in a bit of a personal crisis currently and need to quickly find a piece of speech transcription software that works on Linux and does not require a significant time investment to set up and can help me transcribe a number of audio clips <15 min. each.

• Can someone recommend a program that can transcribe some audio recordings for me and is relatively simple to set up and use?
• Do such programs need a GPU to run effectively? I'm running a Dell XPS 9370 laptop which only has internal graphics.

My backup plan is to listen and transcribe by hand, so recommendations of a program that will allow me to self-transcribe by typing while listening at a reduced rate are also appreciated.

• If any experienced transcribers are reading this, have you found that your pedals worked well with Linux?

Normally I would try out all the different programs and do more than the small number of searches I've done, but my timeline doesn't allow time for to build a cluster of custom-coded transcription bots running gentoo on hand-soldered hardware.

My environment is EndeavorOS running on a Dell XPS 9370,internet is over Wifi, with no external dongles or anything currently hooked up.

Today I just learned that systemctl --force --force reboot is a command. We had a computer we remotely connected to which got permission errors and bus errors when we tried to reboot it normally. For some reason the mentioned command did actually manage to shutdown the computer bit did not manage to reboot it correctly.

I wonder what the double --force flag actually accomplishes and what possibly could hinder a regular reboot in this scenario.

There has been a steady uptick of people stating that they will migrate (or already have) to Debian – seeking refuge from what they see as greedy corporate influence. I understand the sentiment fully. However, there’s a problem here that I want to talk about: security.

The ugly truth is that security is hard. It’s tedious. Unpleasant. And requires a lot of work to get right.

Debian does not do enough here to protect users.

Long ago, Red Hat embraced the usage of SELinux. And they took it beyond just enabling the feature in their kernel. They put in the arduous work of crafting default SELinux policies for their distribution.

...

However, its default security framework leaves much to be desired. Debian’s decision to enable AppArmor by default starting with version 10 signifies a positive step towards improved security, yet it falls short due to the half-baked implementation across the system.

...

The fundamental difference between AppArmor and SELinux lies in their approach to Mandatory Access Control (MAC). AppArmor operates on a path-based model, while SELinux employs a significantly more complex type enforcement system. This distinction becomes particularly evident in container environments.

...

The practical implications of these differences are significant. In a SELinux environment, a compromised container faces substantial hurdles in accessing or affecting the host system or other containers, thanks to the dual barriers of type enforcement and MCS labels.

TLDR: According to the author, Debian's use of AppArmour is not as effective as RedHat's use of SELinux when it comes to security.

Obviously, a bit of clickbait. Sorry.

I just got to work and plugged my surface pro into my external monitor. It didn't switch inputs immediately, and I thought "Linux would have done that". But would it?

I find myself far more patient using Linux and De-googled Android than I do with windows or anything else. After all, Linux is mine. I care for it. Grow it like a garden.

And that's a good thing; I get less frustrated with my tech, and I have something that is important to me outside its technical utility. Unlike windows, which I'm perpetually pissed at. (Very often with good reason)

But that aside, do we give Linux too much benefit of the doubt relative to the "things that just work". Often they do "just work", and well, with a broad feature set by default.

Most of us are willing to forgo that for the privacy and shear customizability of Linux, but do we assume too much of the tech we use and the tech we don't?

Thoughts?

Apparently I installed that thing in 2006 and I last updated it in 2016, then I quit updating it for some reason that I totally forgot. Probably laziness...

It's been running for quite some time and we kind of forgot about it in the closet, until the SSH tunnel we use to get our mail outside our home stopped working because modern openssh clients refuse to use the antiquated key cipher I setup client machines with way back when any longer.

I just generated new keys with a more modern cipher that it understands (ecdsa-sha2-nistp256) and left it running. Because why not 🙂

I have an old Mac Pro that has been collecting dust for years. Today I bought an SSD and install Debian on the machine. It works flawlessly.

Further reading revealed that there is an active community around the classic mac pros and thanks to their modular nature they can be fully upgraded. People even upgrade the CPUs in this thing.

So if you like playing around with a PC like the old days, that is also Linux compatible, a Mac Pro 5,1 seems a good choice. AFAIK you can get it for cheap and a decent upgrade won't break the bank.

Hi everyone,

I’m excited to share that I’ve started working on a new project called Journal Helper. Its a journal viewer built from scratch using Qt6 and C++. The goal is to provide a fast, visually integrated journal viewer for Linux, particularly for KDE/Plasma users.

While there are existing tools like journal-viewer (https://github.com/mingue/journal-viewer), which uses WebKit, I found that its GUI doesn’t integrate well with the Qt/Plasma ecosystem. I also wanted to improve performance and create a more seamless visual experience. Therefore, I decided to create a new viewer from scratch that should be quicker and more efficient.

The project is still in its early stages, but I’d love to get more people involved, especially those who are interested in Qt development. As a beginner myself, I’m eager to learn from others and collaborate on making this tool as good as it can be.

How to Get Involved

GitHub Repo: https://github.com/rughinnit/journal-helper-qt

AUR Package: https://aur.archlinux.org/packages/journal-helper-qt

Any contributions, whether it’s in the form of code, design ideas, or feedback, would be incredibly valuable. If you’re experienced with Qt, C++, or even just interested in contributing, please feel free to fork the repo or reach out.

I’m aware of tools like KJournalDBrowser (https://apps.kde.org/kjournaldbrowser/), but I had some trouble with installation without using Snap. My goal is to create something simple and accessible for all users.

Looking forward to any thoughts, contributions, or advice you might have!