Looks like he has a thing against hedgehogs…
That has nothing on Riker’s single nipple ensemble:
Is this Tingle from a live action Zelda show?
OMG it's Tony Levin! ❤️
Much chunkier and no bass skills
The mustache is mandatory.
Yes, but prominent nipples are also required.
It was a cold day in space.
It was actually a pretty balmy space day, but the revenge was served ice cold
proper turtle neck tie
could be better. a proper very experienced machinist could do it in metal...
He wore the dickie on the outside
Ok, I'm not sure if you read my bio - but I am a proper experienced machinist. 20+ years - fuck my life. This would be excruciatingly hard. First off, that coloring would need to be either oxidized bronze or brass. You'd need to then machine perfect hexagons (the bestagons) and both of those are very sensitive to work with.
I'd need to CNC out all of the patterns first (depending on what the customer wanted, brass or copper) and then make tiny links out of the same material. This would cost tens of thousands to make out of metal. I'm not kidding here - for me to do this off the top of my head, I'm thinking $40k. And that is only because the designs have to be precise and I personally will not do marginal work when it comes to Trek.
And ontop of all that, you need someone that can do real, serious work on the clothing. This is, again, assuming the pieces are metal. This would be so crazy expensive that no one that is a professional will take on the job
Hey! you might be interested to learn there is an entire type of embroidery that uses precious metal pieces called Goldwork.
spools of precious metals that have been wound into very tight springs are used as embroidery or cut into small pieces and sewn on to make beautiful complex patterns.
and garments made this way even take on a different appearance as they oxidize over time!
no need for machining parts! just time, patience and a decent thimble.
Perfect hexagons are not to spec. Notice how each hexagon is different yet they all fit together. That gives it an organic look. Makes it far more difficult to machine since now you can’t just machine a single piece of round stock into a long hexagon and then cut them off into pieces with the right thickness.
If they were perfect hexagons it would be easy. Just need a big enough piece of stock.
Yes, exactly this.
Honestly, just stamp out hexagons out of whatever sheet you have laying around, apply paint/lacquer or best yet, engrave a pattern. Pin it on a fabric backing, and presto.
No, it won't drape, or be comfy, but it'll be cheap and sort-of pretty. Actually, it would probably stab you in the neck several times during the 30 seconds you wear it...
Yes, that's the practical way. But asking a machinist to do this? Just don't.
A textile geek could have this back to you before lunch using stuff found in the scrap pile.
And looking closely at it, that's exactly how it was made.
Yep. But asking for this in metal is bonkers. You'd need both the textile geek and a machinist to collab closely. And they would both need a deep Trek knowledge/appreciation. To remake this with metal would be just the project of a millionaire with a deep love of all things Trek.
Material Arts and Design is a conglomeration of many disciplines. Often textiles, jewelry, ceramics, sometimes glass blowing and furniture making. You are way over thinking this. This would be a fun colab. They're not even regular hexagons. They look like they were made with felt sheets.
I don't think I am wrong here. The irregularity is what makes it difficult. Don't even think about specific units here; 2x2x2x2x2x2 is easy. 1.9x2.4x3x2x3.5x2x is difficult.
You're trying to use a big, high tech machine to make it. I'm talking about using a coping saw. Quite different approaches.
I'm not a machinist and the thought of making hexagons on a lathe makes me cry.
You wouldn't do that on a lathe. You would use a mill.
Hexagons are the bestagons.
I think this would only be comfortable and lay nicely if the bestagons are slightly curved, and I wonder if a topologist might answer how that would affect the tiling.
A curve on one axis seems manageable, but unless you're making pauldrons, you're going to have octagons that bend in two directions at the shoulder. Making those tile correctly seems as if it might be challenging.
Hired, you start tomorrow. Yes I know. And your previous ghola may have had a conversation with me once about machining questions or something in that vain that I vaguely recall. I worked in two machine shops for a short time and still have small desktop aspirations here and there for jeweler's scale or maybe something like a gingery lathe.
OK, you even using "ghola" correctly makes me want to do this project, even if it ruins me financially.
/c/TenForward: Your home-away-from-home for all things Star Trek!
Re-route power to the shields, emit a tachyon pulse through the deflector, and post all the nonsense you want. Within reason of course.
~ 1. No bigotry. This is a Star Trek community. Remember that diversity and coexistence are Star Trek values. Any post/comments that are racist, anti-LGBT, or generally "othering" of a group will result in removal/ban.
~ 2. Keep it civil. Disagreements will happen both on lore and preferences. That's okay! Just don't let it make you forget that the person you are talking to is also a person.
~ 3. Use spoiler tags. This applies to any episodes that have dropped within 3 months prior of your posting. After that it's free game.
~ 4. Keep it Trek related. This one is kind of a gimme but keep as on topic as possible.
~ 5. Keep posts to a limit. We all love Star Trek stuff but 3-4 posts in an hour is plenty enough.
~ 6. Try to not repost. Mistakes happen, we get it! But try to not repost anything from within the past 1-2 months.
~ 7. No General AI Art. Posts of simple AI art do not 'inspire jamaharon'
~ 8. No Political Upheaval. Political commentary is allowed, but please keep discussions civil. Read here for our community's expectations.
Fun will now commence.
Sister Communities:
Want your community to be added to the sidebar? Just ask one of our mods!
Creator Resources:
Looking for a Star Trek screencap? (TrekCore)
Looking for the right Star Trek typeface/font for your meme? (Thank you @kellyaster for putting this together!)
