📢📢📢 OpenAir joins 350+ companies and organizations from across the CDR sector to call for a method-neutral EU #CRCF 🇪🇺🇪🇺🇪🇺  docs.google.com/document/d/1...

I have been investigating the fine art of dishing out a wooden chair seat for comfort today, and made discoveries that can be readily condensed into a, imho miraculously easy formula. So here goes:

Your "sitz" bones or ischial tuberosities are prominences of the pelvis that are the hard spots when you sit. They are pretty consistently located in adult humans as it turns out, though you'll have a hard time finding dimensional data if you go looking! I measured approximate spacing among a slightly inebriated and jovial crowd who endured the indignity with humor and made a rough prototype seat to check my theory. Drill two 2-inch diameter holes spaced five inches apart at center (3-inches of material remaining between the holes). For a finished seat, one would shape the edges, but don't even bother for this experiment - just drill the holes in a piece of lumber and sit down on it. shift around for comfort and when your ischial tuberosities align with the holes you will say aaah!

I will be making two holes in a rectangular stool seat at this spacing, centered about three inches from the "back" edge of the stool, and sanding smooth and dishing out the seat a little. I'll try to remember to post a finished picture, but I found this preliminary result too great and dramatic to wait.

Some individuals might be grateful for a third hole at the centerline and about two inches closer to the back edge - where a tailbone-afflicted person does not need hard support and an average person will not miss it. I have not tested this third hole yet, maybe others will report...

quite a lot of captured CO2 can go into concrete. Maybe a cement (powder) producer is not able to tap into that method directly, but policy shifts will open it up. There are already several US states with low-embodied-carbon concrete laws creating markets for this purpose.

entry details in the image text. A QR code is provided for a registration link

cross-posted from: https://slrpnk.net/post/3903718

Excerpt:

That’s the theory, anyway. But today, the lion’s share of the CO2 captured from industrial processes doesn’t go back into the ground. Instead, 60 percent of it is used to extract more oil, in a controversial process known as “enhanced oil recovery.”

“I think it’s a huge problem,” said Lorne Stockman, research co-director of the advocacy group Oil Change International. “The oil and gas industry has done a very good job of co-opting our climate and clean energy policy.”

For over a decade, the U.S. government has been quietly funding the capture of CO2 that is ultimately used to drill more oil. Some experts and researchers argue that the climate impact is net positive: The oil will be drilled anyway, and the process can help companies learn how to capture CO2 more efficiently. But others say that the government shouldn’t be helping companies sustain more fossil fuel extraction.

My rainwater collection begins with a first-flush and debris removal tank, but it is not ideal; all the water flows through it and in a big rain it can stay stirred up. So it has debris and because it is necessarily open to the roof this means some bugs in there. The outlet to the storage tank is wrapped with three layers of window-screen cloth, but the overflow is open to the drain. Frogs (cute little coqui tree-frogs) come up the drain and inhabit the tank. The storage tank overflow ties into the first flush overflow, so once in a while there is a tree frog in the first storage tank. There are no bugs in that tank so the frog will die if I fail to capture it (which they are very wily).

How can I keep a frog from climbing up the pipe while being sure I do not obstruct water going down the pipe?

Table top is four 50-pound bags of ready-mix grout concrete (no stone, just sand), 3m of 1m wide 1x2inch fence mesh.

Chairs were solid white upholstery. We bought them in a second-hand store and painted with diluted acrylic (to hide old stains). Waiting 30 days before I apply sealer to the concrete.

has anyone here ever experimented with an "electromagnetic" pump? If the pumped liquid is conductive and the piping is enclosed in a coil (think solenoid), and a current is passed across the fluid near the coil, then the magnetic field made by the coil should attract the fluid passing the transverse current (causing it to flow). As fluid flows toward the coil, new fluid starts passing current and so on.

Electromagnetic pumps are used in metal processing for continuous casting, but those are fancy and expensive devices. Could I pump seawater by wrapping a coil around a garden hose and pop-riveting a couple of electrical contacts into the hose on opposite sides next to the coil? I think regular "fresh" water would not be sufficiently conductive, but whatdoIknow? My longer term plan is to try pumping molten salt, but I want to learn on cooler stuff first.

I'm all ears!