482
submitted 10 months ago by stopthatgirl7@kbin.social to c/news@lemmy.world

A New York-bound Virgin Atlantic flight was canceled just moments before takeoff last week when an alarmed passenger said he spotted several screws missing from the plane’s wing.

top 50 comments
sorted by: hot top controversial new old
[-] blargerer@kbin.social 136 points 10 months ago

While its likely true that the wing panel was both non-critical and secure, I'd be much more worried that if they missed something like that, that they could have missed any number of other things as well. Isn't there supposed to be some sort of check-list run?

[-] Hildegarde@lemmy.world 50 points 10 months ago

Pilots perform an inspection of the aircraft before every flight. Missing fasteners on the top of the wing would not be visible during a walkaround from the ground.

Planes are allowed to fly with many parts missing. A few missing fasteners on a non structural part is fine, but missing fasteners that the pilots are unaware of is a big issue.

[-] FlyingSquid@lemmy.world 22 points 10 months ago

Shouldn't that inspection include looking at the top of the wing out the windows?

[-] theyoyomaster@lemmy.world 25 points 10 months ago* (last edited 10 months ago)

There isn’t much on top of the wing that is highly critical. Some planes you can’t even see the top from anywhere in the plane too. An actual issue like leaking fluids or damaged flight control surfaces are visible from the bottom. Something like a few missing fasteners really isn’t t that alarming. I’ve flown plenty of times with some missing, sometimes speed taped and sometimes both the first few times I asked the crew chief but eventually I became familiar with where and how many missing weren’t an issue.

[-] Pips@lemmy.sdf.org 17 points 10 months ago

I’ve flown plenty of times with some kissing

How about heavy petting?

[-] theyoyomaster@lemmy.world 9 points 10 months ago
load more comments (3 replies)
load more comments (1 replies)
[-] Snapz@lemmy.world 103 points 10 months ago

We're going to have to start walking around the plane with the pilot before takeoff like a rental car dent check.

[-] herrcaptain@lemmy.ca 90 points 10 months ago

I knew software companies were offloading QA testing onto their paying users, but who would have guessed that passengers would start playing that role too?

[-] meco03211@lemmy.world 26 points 10 months ago

Some big wig had to go to target one day and saw the self checkout line and was like "I have an idea!"

[-] remotelove@lemmy.ca 13 points 10 months ago

In return, he had a conversation with a big wig from Target where he taught them how many checkout stations you could actually cram into a tiny space.

load more comments (1 replies)
[-] FLP22012005@lemmy.world 17 points 10 months ago

Early Access Airplane

[-] OpenStars@startrek.website 71 points 10 months ago
[-] xenomor@lemmy.world 60 points 10 months ago* (last edited 10 months ago)

Given how completely the airline industry disregards customer service and treats its customers like cattle, I don’t know why anyone would expect them to do a proper job of maintaining equipment. Furthermore, given how eager we are to gut regulation and dismantle the administrative state, all of this is going to just keep getting worse and worse.

[-] gregorum@lemm.ee 10 points 10 months ago

"b-b-but taxes are theft!"

/s

load more comments (1 replies)
[-] SnotFlickerman 46 points 10 months ago

New York Post is a right wing shitrag like The Daily Mail.

[-] NeatNit@discuss.tchncs.de 33 points 10 months ago

What do you think the implications of that are for this article reporting a completely non-political incident?

[-] nova_ad_vitum@lemmy.ca 24 points 10 months ago

Probably that they generally don't care about getting a story right or corroborating sources. I agree that in this case that doesn't matter for getting the high level facts across.

[-] UNWILLING_PARTICIPANT@sh.itjust.works 23 points 10 months ago

They get traffic and unless someone comments otherwise, a slight boost in perceived respectability

[-] afraid_of_zombies@lemmy.world 7 points 10 months ago

Everything is political, at least with them.

[-] Tatters@lemmy.world 41 points 10 months ago

I imagine a lot of the passengers were pissed off when the flight was cancelled because one of their fellow passengers reported some non-critical bolts were missing.

[-] Perfide@reddthat.com 40 points 10 months ago

It's not like the passenger knew they were non-critical. I certainly wouldn't have wanted him to stay silent only for it to turn out they were critical. They also wouldn't unboard and inspect a plane just on the insistence of one passenger, they'd deplane that one passenger if anything. The fact that they did do an additional inspection implies that safe or not, those missing bolts were not noticed in the initial inspection, which leads one to wondering if they missed anything else.

load more comments (1 replies)
[-] octopus_ink@lemmy.ml 37 points 10 months ago

I'd have been grateful.

I think it's entirely reasonable to see something obviously missing on the wing of a plane, even something small, and wonder what else isn't properly secured. I'm sure a plane with four missing allen head screws on that panel is fine. I wouldn't fly on it without an assurance that it wasn't a sign of other poor practices.

load more comments (1 replies)
[-] iamjackflack@lemm.ee 31 points 10 months ago

I would have been fine with not dying in the event it ended up being a real problem. An inconvenience is better to deal with than a plane crash.

[-] agitatedpotato@lemmy.world 29 points 10 months ago* (last edited 10 months ago)

Planes have so much redundency that theres a lot that's uncritical, until suddenly it is critical.

[-] afraid_of_zombies@lemmy.world 8 points 10 months ago

Ideas for a better world #233

Rename your phone hotspot to "I saw a loose bolt on the outside of the plane" and turn it on in the gate waiting area bar.

load more comments (1 replies)
[-] Tristaniopsis@aussie.zone 30 points 10 months ago

The pilot should’ve walked out onto the wing, slapped a couple lengths of duct tape on that section, then carefully and loudly exclaimed; “ YUP! That baby ain’t goin’ anywhere.” while patting the area firmly.

[-] Kanzar@lemmy.world 18 points 10 months ago

It's called speed tape, and genuinely is a thing used in the industry.

https://en.m.wikipedia.org/wiki/Speed_tape

[-] ArousedByJoinery@lemmy.world 28 points 10 months ago

So lucky they spotted it. Really makes you think, wouldn't it be good to implement a system of regular professional inspections to deal with stuff like that? /s

[-] ArousedByJoinery@lemmy.world 24 points 10 months ago

Regular Inspections fix small issues before greater problems arise from them --> some economist with no technical knowledge or common sense goes: hurp de durp our inspections never fix any relevant defects. Better cut back on them to be more economic. --> surprisedPikachu.jpeg

[-] Maggoty@lemmy.world 14 points 10 months ago

Well no. Those are the accountants. Economists have studied survivorship bias. It's the MBAs and accountants looking to cut costs that do that stupid shit.

load more comments (1 replies)
[-] nutsack@lemmy.world 28 points 10 months ago

you can't just screwdriver those things in there man you have to torque them in to the proper spec holy balls

[-] InFerNo@lemmy.ml 14 points 10 months ago

I think they were checking how loose the others were rather than tightening them.

[-] SeaJ@lemm.ee 13 points 10 months ago

Well they are Phillips has so I can't imagine you can even torque them that much.

[-] Everythingispenguins@lemmy.world 17 points 10 months ago* (last edited 10 months ago)

Interestingly enough they are not Phillips it is a very similar looking standard called Torq-set. The lines of the cross are off set a little which make it much easier to put a higher torque into them.

https://en.m.wikipedia.org/wiki/List_of_screw_drives#/media/File%3AScrew_Head_-_Torq-set.svg

load more comments (2 replies)
[-] anarchy79@lemmy.world 27 points 10 months ago

NY Post? Be serious, don't post that drama rag here.

[-] DigitalFrank@lemmy.world 24 points 10 months ago* (last edited 10 months ago)

At some point, that part was taken off the plane and it was replaced, or maintenance was done on it, or maintenance was done on something underneath it. It was then replaced. There is a documentation trail that says all of this was fully completed. The documentation was signed off on by someone who was qualified in this task, and/ or by a supervisor who checked it off.

If there is no documentation, or if the documentation indicates something was done that was in fact not done, the CAA/ FAA is going to have a big problem with this. They are sort of interested in how maintenance is done and documented. If they didn't do this right, what else are they/ have they been "pencil whipping?"

I can see a pretty thorough inspection of their maintenance practices and documentation in the near future. If they find a pattern of this, the maintenance gets decertified and the airline can't fly until they are cleared.

load more comments (2 replies)
[-] acutfjg@feddit.nl 23 points 10 months ago

Don't worry! There were 119 fasteners being used. Ignore the fact that 4 were missing. The plane was designed to use whatever number of fasteners we want. The amount is just a suggestion

/s

[-] teuto@lemmy.teuto.icu 34 points 10 months ago

For what it's worth, just about every panel like this is certified to have a specific number of fasteners missing. A lot of the time there will be some other qualifiers such as not missing the leading fastener or not missing adjacent fasteners. Having a bunch in a row like this incident would probably not be ok, but I couldn't say without the maintenence manual.

load more comments (2 replies)
[-] fidodo@lemmy.world 8 points 10 months ago

Planes are designed to have very high tolerances so yeah, they have more fasteners than necessary for exactly this reason. Of course you still want to fix it, but they are absolutely designed to not need them all.

[-] arin@lemmy.world 20 points 10 months ago

Speed holes

[-] Steamymoomilk@sh.itjust.works 11 points 10 months ago* (last edited 10 months ago)

~~Stealing catalitic converters for money~~

Stealing bigass phillips screws from planes

--petty theift criminals

[-] Custoslibera@lemmy.world 11 points 10 months ago

I would have been fine flying on that plane.

Highly unlikely that panel was critical to keeping the plane in the air even if it did come off during flight.

[-] rusticus@lemm.ee 24 points 10 months ago

You don’t think it’s possible that missing bolts in a non critical part of the plane is reflective of poor inspection and maintenance and that would increase the risk of missing or loose bolts in, say, a door?

load more comments (13 replies)
[-] Tessellecta@feddit.nl 18 points 10 months ago

Panels coming off during flight is still not ideal, even if they're not critical to flying. They can hit things that are more essential.

load more comments (6 replies)
[-] afraid_of_zombies@lemmy.world 9 points 10 months ago

If Benny Hill wasn't playing in the background an opportunity was missed.

load more comments
view more: next ›
this post was submitted on 23 Jan 2024
482 points (100.0% liked)

News

23361 readers
2884 users here now

Welcome to the News community!

Rules:

1. Be civil


Attack the argument, not the person. No racism/sexism/bigotry. Good faith argumentation only. This includes accusing another user of being a bot or paid actor. Trolling is uncivil and is grounds for removal and/or a community ban. Do not respond to rule-breaking content; report it and move on.


2. All posts should contain a source (url) that is as reliable and unbiased as possible and must only contain one link.


Obvious right or left wing sources will be removed at the mods discretion. We have an actively updated blocklist, which you can see here: https://lemmy.world/post/2246130 if you feel like any website is missing, contact the mods. Supporting links can be added in comments or posted seperately but not to the post body.


3. No bots, spam or self-promotion.


Only approved bots, which follow the guidelines for bots set by the instance, are allowed.


4. Post titles should be the same as the article used as source.


Posts which titles don’t match the source won’t be removed, but the autoMod will notify you, and if your title misrepresents the original article, the post will be deleted. If the site changed their headline, the bot might still contact you, just ignore it, we won’t delete your post.


5. Only recent news is allowed.


Posts must be news from the most recent 30 days.


6. All posts must be news articles.


No opinion pieces, Listicles, editorials or celebrity gossip is allowed. All posts will be judged on a case-by-case basis.


7. No duplicate posts.


If a source you used was already posted by someone else, the autoMod will leave a message. Please remove your post if the autoMod is correct. If the post that matches your post is very old, we refer you to rule 5.


8. Misinformation is prohibited.


Misinformation / propaganda is strictly prohibited. Any comment or post containing or linking to misinformation will be removed. If you feel that your post has been removed in error, credible sources must be provided.


9. No link shorteners.


The auto mod will contact you if a link shortener is detected, please delete your post if they are right.


10. Don't copy entire article in your post body


For copyright reasons, you are not allowed to copy an entire article into your post body. This is an instance wide rule, that is strictly enforced in this community.

founded 1 year ago
MODERATORS