263

I picked out this... thing. The duvet cover had eaten everything in the machine and turned itself into a postmodern textile art piece.

top 48 comments
sorted by: hot top controversial new old
[-] Ferrous@lemmy.ml 110 points 1 month ago
[-] Hubi@feddit.org 27 points 1 month ago

That's exactly why I always tie a knot in the middle of large things like this lol

[-] Successful_Try543@feddit.org 21 points 1 month ago* (last edited 1 month ago)

I never had duvet covers do this. Fitted sheets however 💀. Now, I put them into a big laundry bag I've bought at a large coffee roastery.

[-] ramble81@lemmy.zip 2 points 1 month ago

You know. I didn’t think about doing that for the dryer. The fitted sheets always eat the rest and then I have a jelly-roll style sheet conglomeration.

[-] pageflight@lemmy.world 5 points 1 month ago

Oh nice, it doesn't pull the knot too tight?

[-] Natanael@slrpnk.net 5 points 1 month ago

You have you keep it somewhat loose, just make it so it can't easily catch other things

[-] Hubi@feddit.org 4 points 1 month ago

I've never had that happen personally.

[-] amelia@feddit.org 17 points 1 month ago

How is that even possible! Why is it a topological torus??

[-] whaleross@lemmy.world 21 points 1 month ago

It took me time to find the opening and then to accept that it isn't ripped anywhere. My only explanation is that it took a tumble into the fourth dimension.

[-] 0x0@infosec.pub 10 points 1 month ago

Did it come out with unmatched socks inside of it?

[-] whaleross@lemmy.world 8 points 1 month ago

Now that you mentioned it, I think I threw the other one away in 2007.

[-] expatriado@lemmy.world 15 points 1 month ago

when you put predator and pray in the same fish tank

[-] CultLeader4Hire@lemmy.world 9 points 1 month ago

Ugh fuck duvet covers they’ll eat themselves even if they’re closed and the only thing in there

[-] Malyca@lemmy.zip 9 points 1 month ago

Duvets are the worst, it's like the ultimate boss fight for my dryer

[-] Nighed@feddit.uk 3 points 1 month ago* (last edited 1 month ago)

You have to button them (duvet covers) up again before you wash them. I regret it every time I don't.

[-] trinsec@piefed.social 2 points 1 month ago
[-] Nighed@feddit.uk 1 points 1 month ago* (last edited 1 month ago)

clarifying - duvet COVERS, not the duvet itself.

Of mine, some (more expensive) have buttons, some (IKEA) have poppers, all of them have something though?

[-] trinsec@piefed.social 1 points 1 month ago

Mine are fairly cheap (but feels good) and all they have is just a narrower opening on the foot end. No buttons of any sort. Old, new, doesn't matter. None have buttons.

[-] jaybone@lemmy.zip 2 points 1 month ago

You have to do them with just like the fitted sheet and pillow cases.

I still think one swallowed a pillow case and now I can never find the matching one anymore.

[-] oce@jlai.lu 8 points 1 month ago

You can also use a laundry mesh bag, put either the duvet or the rest in the bag and it will not happen. Laundry bags are also useful to protect clothes with elastics from being stretched and damaged.

[-] ickplant@lemmy.world 7 points 1 month ago

It’s official. You are the chosen one, and this is your legendary weapon.

[-] whaleross@lemmy.world 4 points 1 month ago

Well okay then I guess

[-] heydo@lemmy.world 7 points 1 month ago

If you washing machine has a Bedding setting then try using that. It prevents this from happening, at least of front loading machines.

[-] WhyIHateTheInternet@lemmy.world 5 points 1 month ago

Mine has one that says waterproof... What the hell is that for?

[-] OldChicoAle@lemmy.world 3 points 1 month ago

Cleaning things that are hydrophobic

[-] WhyIHateTheInternet@lemmy.world 3 points 1 month ago

Well, yeah waterproof, but I guess what I mean is how is that cycle any different?

[-] OldChicoAle@lemmy.world 3 points 1 month ago

I assume the soaking cycle times are different? I feel like they would be longer in this case? I don't know the chemistry of detergents, water, and hydrophobic molecules (used in clothing) but I assume the automation either increases soaking time for stain penetration or decrease it if it doesn't matter. ,

[-] whaleross@lemmy.world 3 points 1 month ago

Aha, I'll check it out. Thanks!

[-] Poem_for_your_sprog@lemmy.world 2 points 1 month ago

You're my hero heydo

[-] usualsuspect191@lemmy.ca 6 points 1 month ago

First thought: "why are they holding their baby like that?"

After scrolling down: "oh"

[-] Maeve@kbin.earth 6 points 1 month ago

Wash separately

[-] Swedneck@discuss.tchncs.de 5 points 1 month ago

you pulled out the washing machine's intestines

[-] Brownie@lemmy.zip 5 points 1 month ago

My washing machine ones created a giant extremelly heavy clump of sheets, started shaking like crazy and with the vibrations drove away from the wall which resulted in the dryer on top almost falling

[-] whaleross@lemmy.world 4 points 1 month ago

I have a combo machine that used to do the Melbourne Shuffle until I put it on rubber feet and lowered the centrifuge speed. Now it is happy twerking mostly in place.

[-] Brownie@lemmy.zip 2 points 1 month ago

I might consider that.. Although it only happened once, so we'll see if something similar happens again :D

[-] Buddahriffic@lemmy.world 1 points 1 month ago

Hmm I need to move mine out of the tiny closet they put it in to redo some ductwork I did poorly when the outside duct froze closed over the winter. Moving them at all was a bitch to the point I taped ratchet straps in place for the next time I needed to move them, but the tape failed and now the one strap is behind the machine. I can get another one behind it, though it will be at risk of messing up the duct where it comes out of the dryer. I'm tempted to knock out the wall beside it and install another door for maintenance access because of how annoying they are to move.

[-] BucketBong@p.hobo.social 4 points 1 month ago

Or it made a perfect rotisserie chicken holder.

[-] BeUnique@lemmy.zip 4 points 1 month ago

It reminds me of intestines

[-] BlindPenguin@lemmy.world 4 points 1 month ago

Wait, there are laundry machines that stop when something's wrong?

[-] Feadogbandit@lemmy.world 4 points 1 month ago* (last edited 1 month ago)

I got some silicone rubber bands from Amazon a few years ago and I use them to tie the four corners of sheets and blankets together before washing and drying. Does a great job keeping them from entangling other items in the machine.

[-] username968142@lemmy.world 3 points 1 month ago
[-] whaleross@lemmy.world 3 points 1 month ago

Damn, me too!

[-] zod000@lemmy.dbzer0.com 2 points 1 month ago

My washer does this all the time. It can be infuriating.

[-] OldChicoAle@lemmy.world 3 points 1 month ago

Mildly, one might say.

[-] UnequalExchange@lemmy.world 2 points 1 week ago

Ya I always have to ball up big things I pout into the washer so it doesnt suck up all the other smaller things I put in.

Something sad Ive also found is that when this phenomena occurs sometimes the big articles suck up all the detergent juices and water and prevent the smaller , trapped inside it clothing from getting sufficiently cleaned

[-] whaleross@lemmy.world 2 points 1 week ago

The big eat the small and hog resources meant to be shared by all. The sad parallels of society in the laundry.

[-] Grass@sh.itjust.works 2 points 1 month ago

I recently got a used washer that doesn't have the center column and instead of doing this, blankets now form a bubble or mushroom shape across the whole drum

[-] MonaySimpson@lemmy.ml 1 points 1 month ago

Concrete the washer into the wall.

this post was submitted on 30 Jun 2026
263 points (100.0% liked)

Mildly Interesting

27610 readers
95 users here now

This is for strictly mildly interesting material. If it's too interesting, it doesn't belong. If it's not interesting, it doesn't belong.

This is obviously an objective criteria, so the mods are always right. Or maybe mildly right? Ahh.. what do we know?

Just post some stuff and don't spam.

founded 3 years ago
MODERATORS