Discovered that the attic access hatch isn’t insulated, which honestly isn’t surprising given when it was built. No ladder system. I’m working on cutting up some foam boards to glue to the backside. Hopefully it will reduce how much is radiated through this barrier.
Another thing while you're working on the hatch: air seal it as well. There are gasketed hatches, or you can install a stick-on gasket for the existing one. Stick it to the attic side (rather than the hatch). You may need to put a 2x2 frame inside the access if there's not much space to stick to.
Air movement can carry a lot of moisture and thermal energy. Insulation isn't very effective when air can just move through/around it.
I had some leftover window/door rubber seal strips that I cut to length and put on the frame for the hatch to rest on. This will prevent air flowing between the house and attic. Maybe foam would’ve been better as a “soft landing” but figured it was best to use what I already had
That should work just fine, as long as it's able to compress a bit and create a seal.
Cool. May I ask what IR cam you're using?
Guessing it’s a FLIR One
Plugin to smartphone. I have one and it’s very useful
Yup, FLIR One. Kinda neat seeing the thermal outlines of where the exterior wall studs are
Thank you.
By the way, if you’re interested in one of these, they’re available for $200 USD but they’re OS-specific. The iOS variant won’t work with Android and vice-versa.
I bought the iOS USB-C variant and tried to use it with a Lightning-to-USB-C adapter on my iPhone 13 which didn’t work. People say the Lightning model works fine with an adapter on a USB-C iPhone but I guess the USB-C model isn’t happy with a Lightning iPhone. I decided it was time to upgrade my phone anyways and it worked like a charm on the USB-C iPhone.
It’s really the only downside of this particular model. The price is great but make certain you’re not going to change between iOS and Android anytime soon!
Thank you very much. Yes, I'm definitively interested, and saw they come in two variants. I'm on Android for years, but still pondering if a standalone IR cam would not be more universally useful. Probably rather going in that direction, and send it back if the quality and usability is not satisfactory.
Of course! Sorry for not responding to you directly
I dunno the specific model, but it seems to be a Flir.
It's the flir software, so likely a flir one.
I've got the ulefone 27t. It has a built in flir camera.
Nice.
I borrowed a IR camera from the local public library.
Next I'll maybe borrow a telescope.
Damn, I’m jealous yours has one to loan out. Can I ask what brand and model it was?
I think the fact your library has one to borrow is the absolute best part of this post!
That's exactly what I'm finishing today. That foam board works pretty good and is super easy to work with. Also make sure the air seal is good. I used foam tape where the hatch rests against the frame.
When I crawled up in the attic, I found where the previous owner got halfway done and just gave up. There's still 4-5 unopened rolls of insulation just setting in the corner.
I don't judge the previous owner, I've worked with insulation before.
If it was just that one thing, I wouldn't either. But I'm impressed with their half-assing ability. Last year I was mounting an outside mini-split unit and found where when they turned a porch into a bedroom, they didn't bother building an external wall. They put up studs, drywall on the inside, nothing but foamboard and vinyl siding on the outside.
Lol. I dealt with this last year. Panes of glass just set in the walls. When we ripped it out, the studs and floorboards were rotten through. Thankfully the home inspector warned us to not use that room AT All until we fixed it or tore it down.
We've been here a year and a half now, and we're just about through all the "needs" and into the "wants".
Especially if the space is cramped and humid. That area can really roast you fast during the summer!
We don’t have a truck so I bought narrow R-7.5 boards which happen to be a good fit width-wise by cutting them in half. They didn’t have enough of those, sadly, so I had to resort to a kit similar to this which has a lower R-value. I’m using some construction adhesive to get them to stick together. The foam may not fit tight against the 2x8” walls but it should significantly reduce thermal conductivity.
At the very least, I’ll be putting adhesive rubber sealing strips along the opening to block air.
We recently found out that one of our ducts was just petrified old tape, there had never been any metal ducting there at all. It wasn’t cheap to get fixed but it has made a noticeable difference in how long the AC is on and the temp in the house.
While touring a rental the other day, I saw someone use what looked like one of those shiny aluminum looking car windshield heat reflectors on the top side of the attic access door. It was a 90+ degree day and the attic access hatch felt room temperature.
It would actually be more effective to put the reflective stuff on the under side of the hatch since this would reduce its ability to radiate heat to your space. It would look terrible of course. Actual insulation on the top is going to be the most effective.
That would be a great piece to the full solution. I’m trying to get the R-value to at least 25 (40 being ideal), and the reflective stuff on top or bottom would probably help slow down thermal transfer.
I found that foam insulation on the back side interfered with opening the cover board. You might have a look for little tents to go over the opening on the attic side. eg: https://www.walmart.com/ip/IBEEDOW/15403958129
Unfortunately the hatch isn’t a pull-down. I have to push the board all the way up to get it out of the way. There’s not enough room to install a foldable ladder solution either since it’s at the end of the hall and doesn’t align with the doorways.
It’s frustrating since the solution you posted would be the ideal thing to install.
The tent is just the tent to sit over top of the hole in your ceiling. You'd just push the cover board up into the tent space then open the tent. My hatch has a tunnel built around it to retain several inches of loose fill insulation on the attic floor, and the tent sort of wraps around that tunnel/chimney. Not installed to manufacturer's instructions. Between the tunnel & tent, there's enough space to push the cover up and twist it to remove, then I lean a regular ladder against the tunnel to climb up & push the tent out of the way. Then just set it back over the opening on my way back down. Really just want something to make a second air chamber in that tunnel between the hot attic air and the fiberboard cosmetic cover.
You could probably get the same effect building a little foam-board roof over the opening, especially if your house doesn't have the insulation-tunnel. It's really that I found insulation bonded to the cover board made it too thick to twist out of the opening.
I’ll have to look at those tents sometime to see what would work well with what we’ve got going on up there. I wish they had a “landing pad” around the hatch so you could stand/sit or place tools while you work up there. There’s just so much blow-in insulation though that I don’t think I could make one without severely reducing the amount of insulation.
I use a heat camera to check bearings on equipment. Might have saved the baler one year because the camera showed a piping hot bearing at the top that could have set it on fire.
Throwing this out there just in case: is the attic vented properly?
There are two vents, one on each side opposite of each other. No fans.
I’m used to Texas where they’re vertically mounted with a fan. So I don’t know yet what is “proper” for the northeast region
Inspired by the Dull Men’s Club.
1. Relevant commentary on your own dull life. Posts should be about your own dull, lived experience. This is our most important rule. Direct questions, random thoughts, comment baiting, advice seeking, many uses of “discuss” rarely comply with this rule.
2. Original, Fresh, Meaningful Content.
3. Avoid repetitive topics.
4. This isn't an advice forum
Use a search engine, a tradesperson, Reddit, friends, a specialist Facebook group, apps, Wikipedia, an AI chat, a reverse image search etc. to answer simple questions or identify objects. Also see rule 1, “comment baiting”.
There are a number of content specific communities with subject matter experts who can help you.
Some other communities to consider before posting:
5. Keep it dull. If it puts us to sleep, it’s on the right track. Examples of likely not dull: jokes, gross stuff (including toes), politics, religion, royalty, illness or injury, killing things for fun, or promotional content. Feel free to post these elsewhere.
6. No hate speech, sexism, or bullying No sexism, hate speech, degrading or excessively foul language, or other harmful language. No othering or dehumanizing of anyone or negativity towards any gender identity.
7. Proofread before posting. Use good grammar and punctuation. Avoid useless phrases. Some examples: - starting a post with “So” - starting a post with pointless phrases, like “I hope this is allowed” or “this is my first post” Only share good quality, cropped images. Do not share screenshots of images; share the original image.