49

This didn't seem quite serious enough for UK, but it's kinda neat.
Big Bad Wolf could not be reached for comment.

And as Insulation seems to have become my Special Interest at the moment, I dug into the material a little more.
It's supposed to be installed 400mm thick.
It has a transmission value of 0.12WMK. So 400mm on the outside of the house is equivalent to...150mm of glassfibre or 75mm of cellotex.

As it's vapor permeable, it shouldn't have any of the damp issues poorly installed insulation suffers from.

So, if you can get away with the look, and have the space outside, it's a pretty cool (/warm) material.

you are viewing a single comment's thread
view the rest of the comments
[-] LarmyOfLone@lemm.ee 2 points 7 months ago

Hmm good point about encapsulation. But how is a house harder to encapsulate than a boat? I mean assuming the roof properly protects against rain, you have much less splash, the air humidity is generally lower and it's not corrosive saltwater.

[-] fetter@lemm.ee 6 points 7 months ago

A boat you can take out of water and dry dock, seeing, analyzing, and fixing every interior and exterior surface. A house you cannot dry dock and check the exterior of the foundation under the soil.

[-] Peppycito@sh.itjust.works 5 points 7 months ago

Also, boats are made in a mould in a factory. Much smaller, many less nooks and crannies.

this post was submitted on 02 Feb 2024
49 points (100.0% liked)

And Finally...

973 readers
218 users here now

A place for odd or quirky world news stories.

Elsewhere in the Fediverse:

Rules:

founded 1 year ago
MODERATORS