Having a bit of trouble getting hardware acceleration working on my home server. The cpu of the server is an i7-10700 and has a discrete GPU, RTX 2060. I was hoping to use intel quick sync for the hardware acceleration, but not having much luck.

From the guide on the jellyfin site https://jellyfin.org/docs/general/administration/hardware-acceleration/intel

I have gotten the render group ID using "getent group render | cut -d: -f3" though it mentions on some systems it might not be render, it may be video or input which i tried with those group ID's as well.

When I run "docker exec -it jellyfin /usr/lib/jellyfin-ffmpeg/vainfo" I get back

libva info: VA-API version 1.22.0
libva info: Trying to open /usr/lib/jellyfin-ffmpeg/lib/dri/nvidia_drv_video.so
libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/nvidia_drv_video.so
libva info: Trying to open /usr/lib/dri/nvidia_drv_video.so
libva info: Trying to open /usr/local/lib/dri/nvidia_drv_video.so
libva info: va_openDriver() returns -1
vaInitialize failed with error code -1 (unknown libva error),exit

I feel like I need to do something on the host system since its trying to use the discrete card? But I am unsure.

This is the compose file just in case I am missing something

version: "3.8"
services:
  jellyfin:
    image: jellyfin/jellyfin
    user: 1000:1000
    ports:
      - 8096:8096
    group_add:
      - "989" # Change this to match your "render" host group id and remove this comment
      - "985"
      - "994"
    # network_mode: 'host'
    volumes:
      - /home/hoxbug/Docker/jellyfin/config:/config
      - /home/hoxbug/Docker/jellyfin/cache:/cache
      - /mnt/External/Movies:/Movies
    devices:
      - /dev/dri/renderD128:/dev/dri/renderD128
networks:
  external:
    external: true

Thank you for the help.

Hello, I have had a pool of two hard drives in a mirror pool for some time but the OS got corrupted and I reinstalled the OS. Now I am on Linux Mint and my pool does not appear any more. When I use zpool import it says no pool available to import, I have looked around online and found you can import a zpool by specifying the drives, so I used zpool import -f -d /dev/sda1 -f -d /dev/sdb1 internal I get back my pool

pool: internal state: ONLINE scan: scrub repaired 0B in 00:08:39 with 0 errors on Tue Jun 18 18:38:40 2024 config:

NAME        STATE     READ WRITE CKSUM
internal    ONLINE       0     0     0
  mirror-0  ONLINE       0     0     0
    sdb     ONLINE       0     0     0
    sda     ONLINE       0     0     0

errors: No known data errors

But I am unable to mount the pool, zfs mount internal returns

cannot mount 'internal': legacy mountpoint use mount(8) to mount this filesystem

I tried using mount but I am not having any success, saying mount: internal: can't fin in /etc/fstab.

Is there any chance to get this pool back on the computer or is it a lost cause.

Thank you for the help.

Hello, I currently have a home server mainly for media, in which I have an SSD for the system and 2 6TB hard drives set up in raid 1 using mdadm, its the most I can fit in the case. I have been getting interested in ZFS and wanting to expand my storage since it's getting pretty full. I have 2 12TB external hard drives. My question is can I create a pool (I think that's what they are called), using all 4 of these drives in a raidz configuration, or is this a bad idea?

(6TB+6TB) + 12TB + 12TB, should give me 24TB, and should work even if one of the 6TB or 12TB fails if I understand this correctly.

How would one go about doing this? Would you mdadm the 2 6TB ones into a raid 0 and then create a pool over that?

I am also just dipping my toes now into Nixos so having a resource that would cover that might be useful since the home server is currently running Debian. This server will be left at my parents house and would like it to have minimal onsite support needed. Parents just need to be able to turn screen on and use the browser.

Thank you

So I am looking out for an inkjet printer that can print in A3 size. The Epson ecotanks seem like they best fit my requirements, just wondering if it is actually refillable, and does not lock me out of actually using it after a certain amount of prints, no chips BS and all that. I have seen some stuff about the ink pad filling and then not being able to use it anymore ? Does anyone have experience with this printer and can vouch that it is not a gimmick and will actually work as a printer for a long time. Also how is Linux support for it. Thank you

Hello, thinking of giving Skyrim a go on Linux through Proton, does anyone have a resource that helped with getting some mods going? Can a mod manager be used ?