215
FreeCAD Make-A-Box Generator (lemmy.world)
submitted 10 months ago by dual_sport_dork@lemmy.world to c/3dprinting@lemmy.world
16 comments fedilink hide all child comments

I just dropped this on Printables: A FreeCAD based custom size box generator. I've been using it for all kinds of stuff. Maybe some of you lot will get some use out of it, too.

https://www.printables.com/model/770701-parametric-simple-custom-box-maker-freecad-generat

Plug in your parameters, make a box with filament hinges -- No hardware required. No screws, no nuts, no supports, no glue, no Fusion, no proprietary software, no going cross-eyed looking at OpenSCAD code.

(And yes, the default size in the file will make an M:tG card deck case.)

top 16 comments
sorted by: hot top controversial new old
[-] aodhsishaj@lemmy.world 35 points 10 months ago

That is not properly secure storage for such a valuable item

[-] dual_sport_dork@lemmy.world 10 points 10 months ago

For illustrative purposes only. Terms and condtions apply.

[-] p1mrx@sh.itjust.works 8 points 10 months ago

I suggest uploading some default-size STLs so we can view the parts in 3D.

[-] dual_sport_dork@lemmy.world 8 points 10 months ago

Capital idea. Done, and the Printable has been updated.

[-] p1mrx@sh.itjust.works 5 points 10 months ago

nice 45° angles.

[-] dual_sport_dork@lemmy.world 2 points 10 months ago

Not my first rodeo with holes printed vertically.

[-] christiannils@sh.itjust.works 6 points 10 months ago

Cool, thanks!

[-] Lokisan@lemmy.zip 4 points 10 months ago

Sweet!

[-] Carunga@feddit.de 3 points 10 months ago

Cool. Hope to print one later. Last week I have been searching for exactly this and could not find it. Did you think about an option for adding some simple dividers inside the box?

[-] dual_sport_dork@lemmy.world 3 points 10 months ago

I'm sure there will inevitably be innumerable variants. I was thinking of adding a generator for Gridfinity inserts, and dividers wouldn't be too tough to add, either. Or handles, or swivel latches, etc., etc.

[-] Faildini@lemmy.world 2 points 10 months ago

It generated printable Black Lotuses? Jackpot!

[-] dual_sport_dork@lemmy.world 1 points 10 months ago

For Version 2.0, I plan to add a feature that can do Moxes. You choose the color.

[-] tagginator@utter.online 2 points 10 months ago

New Lemmy Post: FreeCAD Make-A-Box Generator (https://lemmy.world/post/12130063)
Tagging: #3dprinting

(Replying in the OP of this thread (NOT THIS BOT!) will appear as a comment in the lemmy discussion.)

I am a FOSS bot. Check my README: https://github.com/db0/lemmy-tagginator/blob/main/README.md

[-] profdc9@lemmy.world 2 points 10 months ago

I have a few parametric projects I posed on my github:

https://github.com/profdc9/FreeCADParametricModels

One of them is called "Memorybox" and is a gift box I made that has parametrically definable dimensions, and the text embossed on it can be changed as well.

[-] p1mrx@sh.itjust.works 2 points 10 months ago

I think you could improve the latch design by making it curved, with a large-diameter circle centered on the hinge. But I tried to sketch this in FreeCAD, and my circles are coming out as jaggy polygons instead of round. How do people get anything done with this software?

[-] dual_sport_dork@lemmy.world 2 points 10 months ago

Just because it renders that way doesn't mean it is. Depending on your zoom level and probably settings, FreeCAD will simplify the rendering on your screen for performance.

If you used the circle tool in a sketch, the final output when you export or whatever will be a circle.

this post was submitted on 19 Feb 2024
215 points (100.0% liked)

3DPrinting

15787 readers
51 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago
MODERATORS
andypiper@lemmy.world
henry_rowengartner@lemmy.world
j4k3@lemmy.world
GrayBackgroundMusic@lemm.ee