862
top 50 comments
sorted by: hot top controversial new old
[-] tpihkal@lemmy.world 168 points 11 months ago

Actually, they do exist; that's kind of the problem.

[-] capt_wolf@lemmy.world 63 points 11 months ago

Y'see, what ya do is take yer two cords and cut the ends off. Strip the wire and tie 'em together. Then ya wrap em in electrical tape so they're water tight! Bam! Problem solved!

[-] nilloc@discuss.tchncs.de 21 points 11 months ago

You mean these?

I posted these ones I found at the ski area I worked at 8 years ago. I wish they were a joke but some fucking moron had made these and used them on the trees in front of the lodge. In piles of snow too.

[-] ThatWeirdGuy1001@lemmy.world 19 points 11 months ago

Me and my dad actually had to do this with a high voltage plug for an air compressor.

We had a welder that had the same plug as our air compressor but we needed it to be longer. So we spliced two male ends together to make an extension.

It was only extremely dangerous for about 5 minutes but that was some of the sweatiest 5 minutes of my life.

[-] turmacar@lemmy.world 21 points 11 months ago

Next time you should unplug it from the wall first to be less stressful. :)

[-] PsychedSy@sh.itjust.works 6 points 11 months ago

It's ace, so you can buy two plugs with terminals and make your own anyway.

[-] Fubarberry@sopuli.xyz 117 points 11 months ago* (last edited 11 months ago)

Here's a short extension cord version of one

The explanation of why they're a bad idea is valid though. Usually the kinds of people who know just enough to want this type of plug are also the type of people I wouldn't trust with one.

Edit: I'll go ahead and explain why people want plugs like this. These can be used to backfeed power from a generator into a house, letting you used different outlets/lights in the house. A knowledgeable person can actually use something like this safely, but most people who would use something like this don't know enough to do it correctly. The dangers about doing this are:

  • You can easily shock yourself off of the exposed pins of the cord. You can avoid getting shocked by waiting to plug into the generator until the other end is connected first.
  • You can backfeed power onto the electrical grid. The power going backwards through the transformers will step up the voltage to thousands of volts, and could seriously injure or kill the linemen who are trying to fix the outage. This is avoided by making sure you've opened either the house's main disconnect breaker or the breaker for the individual circuit you're plugging into.

There are some safer ways to setup this type of generator use, there are special generator power cords/outlets that won't have exposed energized prongs if plugged into a generator. There are also transfer switches or breaker interlock kits designed to prevent someone from being able to backfeed power by requiring them to disconnect commercial power before the generator can be fed into the house's distribution panel.

[-] elliot_crane@lemmy.world 71 points 11 months ago

It’s pretty telling that the product page has zero reviews. I don’t think this product has any surviving users.

[-] Fubarberry@sopuli.xyz 21 points 11 months ago

I think it's been taken down and relisted multiple times, possibly due to reports. I've seen these plugs on amazon for years now.

load more comments (2 replies)
[-] DannyMac@lemmy.world 14 points 11 months ago
[-] ilovededyoupiggy@sh.itjust.works 38 points 11 months ago

I trust NANCHANGZHENGFUYUANGUOJIMAOYIYOUXIANGONGSI for all my dangerously illegal electrical needs!

load more comments (2 replies)
[-] Delphia@lemmy.world 25 points 11 months ago

The car community has a saying "Only when you know all the rules are you allowed to break some of them"

load more comments (1 replies)
[-] brognak@lemm.ee 9 points 11 months ago

Am I crazy or is the example picture of the interlock backwards. Both sides can be turned on, but only one can be off at the same time 😅

load more comments (2 replies)
[-] kubica@kbin.social 7 points 11 months ago

I'm not well informed, but I wouldn't be surprised if in some places it wouldn't be legal to sell that kind of cords (because of being a safety hazard and such).

load more comments (2 replies)
[-] sxan@midwest.social 48 points 11 months ago

It cracks me up that they'll sell chainsaws to anyone.

[-] User_4272894@lemmy.world 12 points 11 months ago

I used to know a hardware store that sold guns in the 80s. Guy bought one, walked down the block, robbed a bank with it, and died in ensuing police shootout. Store stopped selling guns after that.

load more comments (1 replies)
[-] tyrefyre@sh.itjust.works 48 points 11 months ago

They should put what they are called in the electrical world to help drive home the point. “Suicide cords”

load more comments (3 replies)
[-] AngryCommieKender@lemmy.world 41 points 11 months ago
load more comments (1 replies)
[-] Kolanaki@yiffit.net 35 points 11 months ago

But... They do exist. They're just incredibly stupid and dangerous.

[-] RealFknNito@lemmy.world 20 points 11 months ago

Illegal too, according to the sign.

[-] squiblet@kbin.social 34 points 11 months ago

It’s also a good thing dildos aren’t made of
metal and connected to voltage.

[-] WashedOver@lemmy.ca 25 points 11 months ago

Some are and some pay extra for that...

load more comments (1 replies)
[-] InternetCitizen2@lemmy.world 16 points 11 months ago

Who is your dildo guy? Their selection is too limited.

[-] Imgonnatrythis@sh.itjust.works 6 points 11 months ago

You don't sound fun

load more comments (1 replies)
[-] A_Random_Idiot@lemmy.world 25 points 11 months ago

I hate that we live in a world where this is a popular enough question that a sign had to be made about it.

The fuck is wrong with people? Just rehang the lights! It takes less time and effort than getting in the car and going to Ace to ask for a deathdapter!

[-] RIP_Cheems@lemmy.world 23 points 11 months ago

YOU CANT HIDE THE TRUTH

[-] afraid_of_zombies@lemmy.world 22 points 11 months ago

The electrical ones don't exist because it would mean you have exposed metal that is carrying current when a human touches it. However, for some odd reason you can buy it for control panels.

[-] Kuro@lemm.ee 17 points 11 months ago* (last edited 11 months ago)

Pretty sad that it needs to be explained why these are generally a terrible idea

[-] Shellbeach@lemmy.world 22 points 11 months ago

How else are we supposed to learn/know if not being explained? Omniscience?

[-] Kuro@lemm.ee 10 points 11 months ago

Common knowledge that touching electricity = ouch?

[-] x4740N@lemmy.world 6 points 11 months ago* (last edited 11 months ago)

touching electricity =

^Edit: it's a gif, click on it otherwise my comment won't make sense^

load more comments (2 replies)
load more comments (3 replies)
[-] chemicalwonka@discuss.tchncs.de 12 points 11 months ago

americans....

[-] Custoslibera@lemmy.world 11 points 11 months ago

I don’t understand this.

Do your Christmas light end with a female electrical socket?

[-] the_sisko@startrek.website 9 points 11 months ago

Yep! That way you can daisy chain several in a row.

[-] Custoslibera@lemmy.world 6 points 11 months ago* (last edited 11 months ago)

Could you not just run an extension cord from the male end to the socket though?

EDIT: Never mind…says exactly that in the picture.

[-] the_sisko@startrek.website 9 points 11 months ago* (last edited 11 months ago)

The idea is that the string of lights has a male end and a female end. That way you can have several daisy chained and just plug the one with the male end into the outlet. But if you plan it wrong then you may end up with the wrong end in the wrong place, in which case yeah, use an extension cord or hang the lights all over again.

Oh and it's actually relatively safe this way... Each string of lights normally has a fuse in it, so it prevents the cords from carrying more current than they are designed for.

load more comments (1 replies)
[-] bcron@lemmy.world 10 points 11 months ago

Ace Hardware has Dremels, solder, epoxy, and 600 grit sandpaper, and if you stare at this sign for no less than 40 seconds an employee will saunter up and you can ask them where to find all that stuff.

[-] yamanii@lemmy.world 10 points 11 months ago

What even is this? I never saw one in my life, so the sign must be telling the truth.

[-] User_4272894@lemmy.world 18 points 11 months ago

People hanging Christmas lights do the whole house and when they go to plug it in, they realize they have the female end by the outlet, not the male end. "Fuck, I'm not gonna redo the entire process" the idiot thinks to himself, I'll just get a male/male adapter.

It's not sold because as soon as you plug in the side to the house, the other ends become live, and touching them means "big ouch".

"That's okay, I'll just plug the end into the lights, and then into the house, problem solved" the idiot thinks.

Except the far end of the lights has a male adapter and that end is still live. Plus, anyone who doesn't know about your deadly modification is in danger of hurting themselves because they don't realize the hazard.

There are exceedingly niche applications where these cords are used, but those applications only come up for trained electricians who know how to make one of these cords, and use them responsibly. If you're asking the minimum wage guy in the blue vest, this sign is for you.

load more comments (4 replies)
[-] overzeetop@lemmy.world 9 points 11 months ago

I think thou dost protest too much. Perhaps not so much ace as you claim.

load more comments (1 replies)
[-] Raiderkev@lemmy.world 8 points 11 months ago

I'm sure you can find one on AliExpress.

load more comments (1 replies)
load more comments
view more: next ›
this post was submitted on 16 Dec 2023
862 points (100.0% liked)

Lemmy Shitpost

26781 readers
3107 users here now

Welcome to Lemmy Shitpost. Here you can shitpost to your hearts content.

Anything and everything goes. Memes, Jokes, Vents and Banter. Though we still have to comply with lemmy.world instance rules. So behave!


Rules:

1. Be Respectful


Refrain from using harmful language pertaining to a protected characteristic: e.g. race, gender, sexuality, disability or religion.

Refrain from being argumentative when responding or commenting to posts/replies. Personal attacks are not welcome here.

...


2. No Illegal Content


Content that violates the law. Any post/comment found to be in breach of common law will be removed and given to the authorities if required.

That means:

-No promoting violence/threats against any individuals

-No CSA content or Revenge Porn

-No sharing private/personal information (Doxxing)

...


3. No Spam


Posting the same post, no matter the intent is against the rules.

-If you have posted content, please refrain from re-posting said content within this community.

-Do not spam posts with intent to harass, annoy, bully, advertise, scam or harm this community.

-No posting Scams/Advertisements/Phishing Links/IP Grabbers

-No Bots, Bots will be banned from the community.

...


4. No Porn/ExplicitContent


-Do not post explicit content. Lemmy.World is not the instance for NSFW content.

-Do not post Gore or Shock Content.

...


5. No Enciting Harassment,Brigading, Doxxing or Witch Hunts


-Do not Brigade other Communities

-No calls to action against other communities/users within Lemmy or outside of Lemmy.

-No Witch Hunts against users/communities.

-No content that harasses members within or outside of the community.

...


6. NSFW should be behind NSFW tags.


-Content that is NSFW should be behind NSFW tags.

-Content that might be distressing should be kept behind NSFW tags.

...

If you see content that is a breach of the rules, please flag and report the comment and a moderator will take action where they can.


Also check out:

Partnered Communities:

1.Memes

2.Lemmy Review

3.Mildly Infuriating

4.Lemmy Be Wholesome

5.No Stupid Questions

6.You Should Know

7.Comedy Heaven

8.Credible Defense

9.Ten Forward

10.LinuxMemes (Linux themed memes)


Reach out to

All communities included on the sidebar are to be made in compliance with the instance rules. Striker

founded 1 year ago
MODERATORS