Notendo [RetroPie - RP 5] (discuss.tchncs.de)

submitted 3 days ago* (last edited 2 days ago) by aniki@discuss.tchncs.de to c/3dprinting@lemmy.world

8 comments fedilink hide all child comments

I went looking for a fun case to house a RP 5 for a RetroPie build but everything was either super minimal or just very unattractive to look at.

This is my lovechild of a NES with a Famicom Twin

I designed this to be a bit bigger, take a standard 12mm switch, house an RP 5, and a convenient power button. I also added a standard 40mm exhaust fan hole.

I designed this to fit a hat as well but I haven't tested it.

I'll happily share the STLs if anyone is interested. I am working on posting to Thingiverse now.

It looks like this should fit any model Pi but naturally YMMV.

top 8 comments

sorted by: hot top controversial new old

[-] Imgonnatrythis@sh.itjust.works 8 points 3 days ago

Very cool! Things look a little breezy around the ports. My constructive criticism would be to tighten that up a bit.

[-] aniki@discuss.tchncs.de 5 points 3 days ago

I wanted to leave it open so it's more universal in what can be fitted in there but I may make a revision in the future that is more model specific if I end up printing another one for a 5.

[-] PlasticExistence@lemmy.world 7 points 2 days ago

You could always just do a plate that's customized to the SBC layout, like what you'd get with a PC motherboard.

[-] aniki@discuss.tchncs.de 4 points 2 days ago

I actually started working on the next revision that will have 4 USB-A ports in a panel via extension cables so the pi used is irrelevant AND it will look much more slick.

[-] PlasticExistence@lemmy.world 3 points 2 days ago

Very nice. Thank you for sharing!

[-] aniki@discuss.tchncs.de 3 points 2 days ago

That's not a bad idea! I may add that to the thingi as soon as I can post.

[-] half_built_pyramids@lemmy.world 7 points 2 days ago

Fucking love it

[-] Kolanaki@yiffit.net 2 points 2 days ago

This is my lovechild of a NES with a Famicom Twin

Looks closer to a Virtual Boy.

this post was submitted on 18 Sep 2024

93 points (100.0% liked)

3DPrinting

15282 readers

49 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago

MODERATORS

andypiper@lemmy.world

henry_rowengartner@lemmy.world

j4k3@lemmy.world

GrayBackgroundMusic@lemm.ee