23
Looking for help understanding 3d Model in Cura (lemmy.world)
submitted 1 year ago by Matrim@lemmy.world to c/3dprinting@lemmy.world
8 comments fedilink hide all child comments

I just got into 3D Printing (got my Ender 3 two weeks ago) and I've been loving the experience! Learning lots of new things as well as making a few mistakes and learning from those.

I found this model and wanted to print it for a fish tank:

https://cults3d.com/en/3d-model/various/fish-viewing-cave

In some of the Make screenshots it looks like the model doesn't have a bottom. However when I brought the model into Cura, it looks like the model had a top and bottom portion.

Because of that, I thought it would need supports so I went ahead and printed accordingly. When the print finished, it was just like the Make screenshots provided. No big deal, it was super easy to remove the supports. However, reviewing the model in Cura I'm not sure how I was supposed to know that it wouldn't have the bottom printed.

Thanks in advanced!

top 8 comments
sorted by: hot top controversial new old
[-] fhein@lemmy.world 5 points 1 year ago

In the photos it also looks like there's a low wall below the corner "window", which doesn't look like it's present in the preview. Perhaps the creator made different iterations of the model, and either used photos from an earlier prototype, or they uploaded the wrong model file.

[-] sun_is_ra@sh.itjust.works 4 points 1 year ago

The print doesnt have bottom printed. In Cura its lied on its side thats why it look like there is bottom when there isnt.

[-] Carighan@lemmy.world 6 points 1 year ago

I still don't see it, tbh.

I checked the linked model, and it has this almost break-away part in the middle (height-wise) as if the print is intentionally two halves you can can print at once or so. But then the window also looks completely different than in the pictures of the printed piece.

[-] Matrim@lemmy.world 1 points 1 year ago

Man I have no idea! From the previous comment I thought it made sense. I redid the print yesterday and it printed exactly how it looks in Cura with a top and bottom.

[-] Matrim@lemmy.world 3 points 1 year ago

Oh my goodness, why didn't I see that before! Thank you for pointing out something so obvious.

[-] LazaroFilm@artemis.camp 3 points 1 year ago

In cura switch to the preview mode to see the paths your printers will lay plastic at. It will tell you a better idea of what your final product will look like.

[-] Matrim@lemmy.world 3 points 1 year ago

I'm seeing it now, appreciate the advice for checking the model in preview mode.

[-] sj_zero@lotide.fbxl.net 2 points 1 year ago

That is showing the model, but you can press the print preview button and it should show you how it will print. If that was just a superfluous polygon that wouldn't print, it'll show up in the print preview.

this post was submitted on 07 Aug 2023
23 points (100.0% liked)

3DPrinting

15583 readers
67 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
andypiper@lemmy.world
henry_rowengartner@lemmy.world
j4k3@lemmy.world
GrayBackgroundMusic@lemm.ee