59

I've been using the same one for a few weeks now and just noticed it was turning black. I tried to clean it but that did nothing. Is this something that happens with cheap needles? Is there a particular brand I should get?

top 22 comments
sorted by: hot top controversial new old
[-] Uphillbothways@lemmy.world 22 points 1 year ago

the steel is just developing a black oxide coating from handling. no problem.

[-] MrJameGumb@lemmy.world 9 points 1 year ago

Oh good! I was worried it might stain the fabric or something lol

[-] CoffeeDart@lemmy.world 5 points 1 year ago

I am no expert but maybe you can try cleaning with vinegar

[-] Bozicus@lemmy.one 4 points 1 year ago

Vinegar would probably work, but an emery strawberry is the usual tool for cleaning needles. The sand inside scrubs off debris, and it also helps keep the needle sharp. I give needles that seem dirty a wipe with a tissue in case of chunks, then stab the strawberry until the needle looks shiny. I’ve been told to avoid exposing needles to water, because it can lead to rust. (Not that I actually do, lol, I wet the end of my thread all the time. But I try not to clean them with water or water-based products unless it’s fallen in the cat box or something, and I need to sanitize it with alcohol).

[-] MrJameGumb@lemmy.world 1 points 1 year ago

I tried vinegar and fine steel wool and it just made the black part shinier lol

[-] danekrae@lemmy.world 7 points 1 year ago

It looks like it's been heated.

[-] Ataraxia@lemmy.world 7 points 1 year ago

It's their acidic grease hands

[-] FracturedEel@sh.itjust.works 5 points 1 year ago

I think this might be the first meta comment I've seen since coming to lemmy

[-] MrJameGumb@lemmy.world 2 points 1 year ago

Nope, just regular use!

[-] IoSapsai@lemm.ee 7 points 1 year ago

Happens all the time with mine. Some brands oxidize faster than others, I think it's the nickel content that does it. It doesn't stain but the oxide layer causes more friction so the needle doesn't glide as easily. I usually change them when they get to this point, never bothered cleaning them. Now that I think of it, it's kind of wasteful.

[-] thegiddystitcher@lemm.ee 5 points 1 year ago

Actually never seen this happen with any of mine and now I'm really curious to find out whether the suggestion to clean it off works. Please report back! For science!

[-] MrJameGumb@lemmy.world 2 points 1 year ago

Cleaning with vinegar and steel wool didn't really do anything. The needle still works fine, but as someone below mentioned it's now has more of a matte texture to it. I'll probably keep using it unless something else happens to it lol

[-] Bozicus@lemmy.one 3 points 1 year ago

Did you try an emery strawberry? It scrubs in a different way from steel wool, and is designed to deal with this situation. It’s possible the residue you have isn’t removable for some reason, of course, but I think it’s worth trying the Official Tool(tm) before giving up. :3

[-] MrJameGumb@lemmy.world 2 points 1 year ago

I'll have to pick one up the next time I go to the craft store

[-] Bozicus@lemmy.one 1 points 1 year ago* (last edited 1 year ago)

Oh, didn’t you get one with your pincushion? …er—if you have a pincushion, I suppose I just assume anyone who does any kind of sewing would, at some point, have gotten the cheap “tomato and strawberry” pincushion and emery strawberry set. Usually neither is very good, but it’s actually kind of hard to find an emery strawberry sold by itself.

[-] MrJameGumb@lemmy.world 6 points 1 year ago

Ok so after replying I decided to go look at my sewing kit and the tomato pin cushion DOES have a little strawberry on it! I had thought that was just a little pom-pom to make the pin cushion look festive but now I realize it's full of little beads like you described! I guess you learn something new every day! I've been sewing since I was in highschool in the 90s and never realized the little strawberry had a special purpose lol

[-] Bozicus@lemmy.one 1 points 1 year ago

Oh, awesome! Forget the first line of my other comment, lol. I suppose a lot of people don’t use them. I don’t remember when I found out what they were for, but they do make a difference for me, both with needles and with pins.

[-] MrJameGumb@lemmy.world 2 points 1 year ago* (last edited 1 year ago)

It definitely smoothed out the needle a little more but it's still black lol

I think it's probably fine though. I have like 8 more cross stitch needles I haven't used at all yet and this one seems to be working fine

[-] Bozicus@lemmy.one 2 points 1 year ago

Then that color is probably there to stay, lol, but I’m glad it helped with the surface texture. And yeah, I have never had that level of discoloration, but it sounds like other people have, and it’s not an issue. A needle that’s working is always a good needle, IMO, even if it doesn’t look very good.

[-] MrJameGumb@lemmy.world 2 points 1 year ago

I have a pin cushion but no strawberry lol

That's what I get for buying the cheapo sewing kit

[-] Bozicus@lemmy.one 2 points 1 year ago

Oh, that sucks. I always desire the cheap kits that come in little cases, because they look so cute… until I actually open them, lol. There’s always something wrong with them.

[-] sortofblue@lemmy.nz 4 points 1 year ago

I've seen people suggest that it's to do with your own body chemistry but I dont know if there's any science to back it up. At any rate, they recommended gold plated needles to help prevent the problem.

load more comments
view more: next ›
this post was submitted on 23 Jul 2023
59 points (100.0% liked)

Cross stitch and embroidery

1115 readers
1 users here now

Share your stitching and meet new crafty folks! All forms of embroidery and all skill levels welcome 🪡


  1. All instance rules apply: see sidebar at sh.itjust.works

  2. WIP/FO Posts should include pattern details (at least name, preferably link).

  3. Relevant self-promo from community members is acceptable but will be handled on a case-by-case basis. Exclusively salesy posts may be removed.

founded 1 year ago
MODERATORS