74
Why still using the imperial system? (abananaforscale.com)
submitted 7 months ago by Zerush@lemmy.ml to c/memes@lemmy.ml
72 comments fedilink hide all child comments
you are viewing a single comment's thread
view the rest of the comments
[-] Shareni@programming.dev 4 points 7 months ago* (last edited 7 months ago)

I rarely have to divide things by five or ten. I have to divide things by two, three and four a lot.

I don't know anything about carpentry, so I'll take your word on it.

My best guess is that the standards are different. For example 2cm stock instead of 1.9. Then only the 1/3 is problematic.

[-] captain_aggravated@sh.itjust.works 2 points 7 months ago

I'm building a shaker table out of white oak. I milled all my stock to 3/4" thickness.

Just today, I resawed a board to 3/8", or half its original thickness. I glued two boards together to make 3/2" (1 1/2") thick table legs, and I cut mortises 1/3 the thickness of the stock, or a nice even 1/4".

I'm familiar with the metric system, I learned chemistry and physics in metric. I prefer woodworking in fractional inches because metric seems like a bigger pain in the ass

this post was submitted on 31 Mar 2024
74 points (100.0% liked)

Memes

45550 readers
1714 users here now

Rules:

  1. Be civil and nice.
  2. Try not to excessively repost, as a rule of thumb, wait at least 2 months to do it if you have to.

founded 5 years ago
MODERATORS
gary_host_laptop@lemmy.ml
sexy_peach@feddit.de
cyclohexane@lemmy.ml
cypherpunks@lemmy.ml