114
If it works, it works...
(lemmy.world)
Hex key and mini clamp came in handy for battling a lifting edge
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 10 Nov 2023
114 points (100.0% liked)
3DPrinting
15300 readers
81 users here now
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
founded 1 year ago
MODERATORS
You must have been really close to the end for that to work. I've tried many hacks but few really work for me in-situ for more that a dozen layers.
There wasn't much left and nothing that would collide with it. Seemed to work well enough
I usually use glue stick but just ran out
Usually? Like for routine pla prints? I've found myself having to do this (man I love magigoo) but the masses say I really shouldn't have to. Kinda validating if this is actually a thing.
If you have corners lifting during big prints it's nearly always due to a bad first layer or warping. An enclosure, even if it has an open lid since PLA doesn't really like high enclosure temps, would probably do wonders. But if you have an i3 style printer, enclosures can be kind of a PITA. You could also try a draft shield. Basically tell your slicer to print a skirt that's the same height as the print itself.
Pla can also warp when not cooled enough. Although with a a decent textured Pei sheets you should never have pla adhesion issues honestly
Have you tried hairspray? I definitely prefer it as it's easy to put on and gives nice, even coverage.
Not yet, I need to try that