46
locking procedure check (sh.itjust.works)

I just recently got into using a bike for commuting and I was wondering if this is a good way to secure my bike? I know, previously, people would recommend only needing to lock the back tire to a solid object, but I’ve seen videos of people easily cutting the back tire, breaking it and taking the frame/front tire. My method of locking is sort of similar, except I do lock around the splash guard. If this isn’t very secure, I’d have to get a longer ulock or chain, because there doesn’t appear to be an easy way for me to lock around the back tire, frame and solid object with my current ulock. Any suggestions are appreciated.

you are viewing a single comment's thread
view the rest of the comments
[-] sping@lemmy.sdf.org 4 points 1 year ago* (last edited 1 year ago)

As small as is usable is better with U locks. Larger ones can be jacked open easily. Locking the wheel like this means the frame is secure. It's topologically impossible to get the frame without destroying the rear wheel.

[-] FartsWithAnAccent@lemmy.world 1 points 1 year ago* (last edited 1 year ago)

They aren't better if you can't fit them around your frame lol, that said, yeah it's ideal to use one they can't get a jack under.

[-] sping@lemmy.sdf.org 3 points 1 year ago

But there is no practical benefit to including the frame because locking the wheel like this also secures the frame.

[-] FartsWithAnAccent@lemmy.world 2 points 1 year ago

How does that secure the frame?

[-] sping@lemmy.sdf.org 3 points 1 year ago

The wheel is much bigger than the triangle in the frame you would have to pull it through. You would have to cut the rim and tire, or theoretically bend and collapse the wheel, to get the frame away. And then you have a frame without a wheel to try to sell.

Before a thief destroys its value like that, they would get an angle grinder to the lock. Or more likely, move on and look for another bike.

[-] FartsWithAnAccent@lemmy.world 1 points 1 year ago* (last edited 1 year ago)

~~They just take the wheel off, this does not secure the frame. The u lock needs to go around the frame.~~

Ok, I get it now, disregard. Still seems like locking the frame would be a little more secure but I guess this would work too.

[-] frostbiker@lemmy.ca 3 points 1 year ago

When the lock secures the rear wheel within the rear triangle, you can't remove the frame without destroying the rear wheel. Try it at home. It's called the Sheldon Brown method.

[-] sping@lemmy.sdf.org 1 points 1 year ago

That's topologically impossible

[-] FartsWithAnAccent@lemmy.world 1 points 1 year ago

I see what you mean now, Frostbiker explained it.

this post was submitted on 29 Sep 2023
46 points (100.0% liked)

Bike Commuting

1580 readers
1 users here now

A place on the fediverse to share and discuss about commuting by bicycle

founded 1 year ago
MODERATORS