I made this about a year ago and it's one of my favorite creations. Even though I made a mistake in measuring the bottom and had to cut out some slots. One day I'll print it again, but it used a ton of filament and took forever last time.
Whether you found an interesting idea online or want to showcase your personal organization setups or ideas, please feel free to take part and help our community grow!
While posting and commenting in this community, you must abide by instance-wide rules: https://mastodon.world/about
Failure to follow these guidelines will result in your post/comment being removed and/or more severe actions. All posts and comments will be reviewed on a case-by-case basis. This means that some content that violates the rules may be allowed, while other content that does not violate the rules may be removed. The moderators retain the right to remove any content and ban users. We ask that the users report any comment or post that violates the rules, and to use critical thinking when reading, posting or commenting.
This is beautiful.
It might be the first thing that I have seen that makes me really want to have a 3D printer around.
Do you still need to minor in 3D printing to make them practical?
I know that might be an exaggeration, but I've heard they are a bit of a handful. One of my gaming buddies was really into them a few years back. Even as an IT guy, the way he talked about it made it sound like I would need to do a fair bit of research to make anything worthwhile.
I'd say 3D printing is as accessible as it's ever been. There's tons of options nowadays and there are quite a few "plug and play" printers. The hot new one on the block would be the Bambu printers. They have a range of prices and from what I've heard, are pretty easy to use. I haven't tried them because they are proprietary and I like Prusa for it's open source nature. I'm a tinkerer so I have no problem tearing apart and fixing things, as well as I enjoy adding custom mods to fit my needs.
Also, if you don't mind a bit of tinkering, you can get a decent printer for under $200 nowadays if you just want to dip your feet in at a low price. If you have a Microcenter near you, they often sell one of the Creality printers for $100 on sale.
Interesting. Thanks for your thoughts. I might need to at least dip my toes into the water before long.
Of course, and if you have any questions, feel free to shoot me a DM. Also check out !3Dprinting@lemmy.world
Wow that’s crazy cheap, I had no idea
Yeah they have come down in price a lot and it's easy to get in at a variety of price points depending on what you want to do.