13
What do you use to keep the cables out of the way? (lemmy.world)
submitted 1 year ago* (last edited 1 year ago) by Fribbtastic@lemmy.world to c/3dprinting@lemmy.world
10 comments fedilink hide all child comments

I have an Ender 5 Plus with some upgrades ("Old" MicroSwiss Direct Drive, Exoslide XY, custom shroud) and I occasionally have the issue in which the Cables for the Print head as well as the Filament Feeding Tube interfere or get caught on something on the printer.

The most recent example was when I printed (or wanted to print) something and in the middle of the night I woke up and checked up on it and it had a layer shift. Turns out that the filament feeding tube got caught in the X belt of the exoslide and prevented it from moving properly.

I already printed some brackets for the cables on the backside to the print head but the tube is still fairly unstable and flopping over after some time. The same with the filament feeding tube, since they are delivered in a spiral they are fairly fixed in that position and while I could and now have oriented it into a position that it wouldn't get caught, I need a more permanent solution.

What I am looking for is something to keep the cables upright, maybe even some "boom arm" that has some clips on it that pull/hold the cables up but also not as tight so that it interferes with anything...

Here is an image of my Printer. which pretty much shows the issue.

you are viewing a single comment's thread
view the rest of the comments
[-] SpecialPurpose@sh.itjust.works 2 points 1 year ago

Great points. I appreciate the critique. Can you recommend a design that ameliorates the issues you mentioned?

[-] EmilieEvans@lemmy.ml 2 points 1 year ago

I make my own when I need them, so I am not aware of good models for the Ender 5. With the points mentioned, I think you could tell whether a chain is good or not.

Quick search. This looks promising: https://www.thingiverse.com/thing:4635454

This is the interface/linking I use. One detail that isn't visible: the "hub" isn't a cylinder. It's a truncated cone.

end pice:

[-] SpecialPurpose@sh.itjust.works 1 points 1 year ago* (last edited 1 year ago)

Thank you so much for this. I definitely have a better idea of what to look for. I see exactly what you mean regarding the linkage. I have yet to see that system for limiting the radial movement. I love the elegant simplicity. I haven't had any problems with my current chain, but I will definitely incorporate these elements into the next chain I print.

this post was submitted on 15 Sep 2023
13 points (100.0% liked)

3DPrinting

15577 readers
68 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
andypiper@lemmy.world
henry_rowengartner@lemmy.world
j4k3@lemmy.world
GrayBackgroundMusic@lemm.ee