Decimator/DecimatAR with OEM barrel (forum.guncadindex.com)

submitted 1 month ago by hogleg@forum.guncadindex.com to c/help@forum.guncadindex.com

7 comments fedilink hide all child comments

I have been incapable of finishing a decimator build with an OEM barrel; 2 different OEM barrels as a matter of fact.

I've reprinted the upper twice (once because I wasn't sure if I just really messed up the print, once for stripping barrel nut threads) and I've reprinted the barrel nut 3-4 times at this point.

I started this build just before fosscad was nuked, and since the Ark is back up (https://forum.guncadindex.com/c/ark@fosscad.io), I was able to see that there are threads where others have had this issue.

Has anyone overcome this issue personally? The build looks great and I love the AR fcg but I'm hitting a wall here. Should I just drill and pin the barrel nut with a couple of set screws?

you are viewing a single comment's thread
view the rest of the comments

[-] notsuspekt@forum.guncadindex.com 0 points 1 month ago

It helps a lot with threads, and under/over extrusion. If you need the files DM me, you're not supposed to share them cause OP has cancer and he sells them.

[-] hogleg@forum.guncadindex.com 1 points 3 weeks ago

Hey, thanks again for the assistance! I didn't get back to this for awhile; life things. I left an update up at the top for anyone in the future.

this post was submitted on 12 Oct 2025

1 points (100.0% liked)

Help & Support

180 readers

3 users here now

Post here if you have general questions concerning GunCAD, printing, or otherwise fabricating DIY firearms. Newbies are welcome, but users are encouraged to read Ctrl+PEW's Getting Started Guide if they haven't already.

Shitty stock image may be changed at moderator discretion.

founded 2 months ago

MODERATORS

TheShittinator@forum.guncadindex.com

ItsBildo@forum.guncadindex.com

Alyosha@forum.guncadindex.com