142
AWS: IPv4 addresses cost too much, so you’re going to pay
(www.theregister.com)
A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.
Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.
Subcommunities on Beehaw:
This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.
If my ISP doesn't support IPv6, would I need a proxy or something to access an AWS instance with only an IPv6 address?
A tunnel. I've used these before https://tunnelbroker.net/ and https://www.sixxs.net/main/ probably 10 years ago now. They were pretty good. But of course you need something to act as a router on your network for it to set it up for the whole network. A raspberry pi would be enough or anything running linux. Of course you can probably just set it up on one machine too. I've never done that though.
You could use an IPv6 tunnel broker service. I know Hurricane Electric offers a service free of charge. I use it and it's not bad. Hurricane Electric also has an IPv6 tutorial. See (https://www.he.net)
I've tried using Hurricane Electric's tunnels on pfsense but it just kills my internet connection and the only solution is to reboot
It is very area dependent and what path your data takes. It just so happens that the pathway that my data takes to reach Hurricane Electric's server in NYC is really optimal. I have latency comparable to a native IPv6 network. It's certainly better than my ISP, Verizon's, native IPv6 in my area where my data goes to Virginia and then back to NYC.