24
Ceramic pots with no drainage holes
(lemmy.sdf.org)
All things green, outdoors, and nature-y. Whether it's animals in their natural habitat, hiking trails and mountains, or planting a little garden for yourself (and everything in between), you can talk about it here.
See also our Environment community, which is focused on weather, climate, climate change, and stuff like that.
(It's not mandatory, but we also encourage providing a description of your image(s) for accessibility purposes! See here for a more detailed explanation and advice on how best to do this.)
This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.
I like to drill holes in mine, it's not always safe to do and you should run a bit of water where you intend to drill to stop the dust, but I've saved many pots that way
What kind of bit do you use to drill?
For harder ceramics like these a diamand coated bit (they aren't as expensive as the name makes the seem), always use water and drill through super slow so it doesn't crack (a minute or longer). Good luck!!
Also make sure it is a masonry/ceramic bit. In my my experience that matters more than the diamond coating (I use very cheap steel bits). Drill press is also much easier to control speed and depth, so use that if you have one