8

From the American Humanist Association: contact your Congresscritter - tell them to oppose H.R. 9495, the Stop Terror-Financing and Tax Penalties on American Hostages Act.

the idea that these webs of laws or these models of “how things should work” mean anything tho the people with power are complete nonsense.

Kinda ironic that you are discussing the nonsense of "how things should work" on a federated service where you control the intermediaries you work with and through, which is, IMO, the way things should work.

My first reaction would be to acknowledge them as a fellow geek, but that's because most of the people who live near me would hurt themselves trying to open Notepad. Anyone who knows enough to start hacking my config files would be a welcome guest in my house.

Then I'd kill them with a hammer. :-)

The bill, well-intentioned as it might have been, would disrupt centuries of church dogma

Because the sunk cost of centuries of wrong thinking is more important than protecting children.

In other news, the Catholic Church was unavailable for comment.

40
Happy Blasphemy Day! (centerforinquiry.org)
[-] displaced_city_mouse@midwest.social 15 points 1 year ago* (last edited 1 year ago)

It is by will alone I set my mind in motion.

It is by the juice of sapho that thoughts acquire speed, the lips acquire stains.

The stains become a warning.

It is by will alone I set my mind in motion

488

Let your Congress-critters know this is not the right thing to do.

[-] displaced_city_mouse@midwest.social 13 points 1 year ago* (last edited 1 year ago)

Not sure if it counts, but obsidian for notes and my daily journal, and latte-dock to replace the stock KDE app bar.

Oh, and emacs with doom for general text editing and most coding tasks.

I just hopped both my laptop and desktop from Manjaro to Endeavour - so far, so good. I'm still restoring files from backup and installing stuff, so it's still early days, but already things are feeling better.

2

I've a friend who lives in San Francisco who is in a moderately successful band. They recently concluded a tour through the midwest, where they played Indianapolis, Louisville, Nashville, and Chicago, among other cities. No STL dates at all.

Les Claypool's Frog Brigade is on tour as well, and skipped STL but did play in Peoria, Louisville, and KC this spring.

Last year, the closest Nightwish came was Chicago.

I get Songkick notifications for other bands -- mostly metal and eclectic -- and more often than not, they are playing everywhere but STL. After living for 20+ years in Seattle, I miss having bands come and play even the small clubs.

To avoid sounding petulant, there have been some tours I looked forward to that came to Pop's in Sauget, but I'm sure there are other bands people here like that have bypassed STL venues as well.

So: Anyone have any ideas why STL gets passed over in favor of Nashville and Louisville?

There was a story once that said if you put an infinite number of monkeys in front of an infinite number of typewriters, they would eventually produce the works of William Shakespeare.

So far, the Internet has not shown that to be true. Example: Twitter.

Now we have an artificial monkey remixing all of that, at our request, and we're trying to find something resembling Hamlet's Soliloquy in what it tells us. What it gives you is meaningless unless you interpret it in a way that works for you -- how do you know the answer is correct if you don't test it? In other words, you have to ensure the answers it gives are what you are looking for.

In that scenario, it's just a big expensive rubber duck you are using to debug your work.

8
submitted 1 year ago* (last edited 1 year ago) by displaced_city_mouse@midwest.social to c/3dprinting@lemmy.world

I recently had two print failures on my Ender 3 Neo. In both, it looked like the part came free from the heated build plate after about an hour or so of printing. Both had good starts in the first 15 minutes or so. I had a successful print finish two days ago.

It has been hot and humid here today, and my printer is in a non-AC shed not connected to the house.

I'm wondering if I should wait to kick off the next print until this evening when it should be cooler. Do I need to clean the build plate? I've not done that at all, other than make sure these isn't any filament left on the plate when it finishes.

UPDATE: It's apparent the problem isn't the heat, but the fact that I haven't cleaned the build plate since... well, ever. Adjusting the title to reflect that.

Not just parents -- my wife has an unhealthy mobile game addiction. We've talked about it and talked about it, but it's still a heavy draw for her.

If you want to use gimp as an ALTERNATIVE and go in without the bias, you’ll likely learn your way around a LOT faster.

I think this is the key phrase -- do you want an alternative (where you might have to learn new ways of doing things), or do you want a clone? GIMP is not a clone, but an alternative.

I also think this gets to something I was told loooooooooong ago, when I was a young lad asking what was the best computer to buy. Someone told me, "Find all the software you want/need to run, and get the computer that will run it all."

In other words, if you need to use Photoshop, then maybe you don't use Linux -- maybe stick with Mac or (shudder) Windows.

8
submitted 1 year ago* (last edited 1 year ago) by displaced_city_mouse@midwest.social to c/3dprinting@lemmy.world

I took advantage of a recent offer to stock up on filament for my Ender 3 Neo. I purchased six 1Kg spools of Sunlu PLA+ Matte in grey and white colors. I loaded one of the white spools into the printer and did a small test print -- no problems, looks good, everything seemed fine.

So I decided to fire up a longer print, 8+ hours of an ocarina I downloaded from Printables and sliced using Cura Ultimaker. However, I have yet to have a successful print. Three different times, the filament has gotten bound up on the spool, so much so that the feed mechanism just gives up and the print stops. I've cancelled two of these prints after 2-3 hours when the filament got stuck on the spool.

Has anyone else seen this? Is there a fix, short of pulling it all off the spool? I've never had to, but can you even respool the filament without causing more problems? I can't babysit the printer for 8-10 hours, and would like to kick off some overnight jobs again one day...

[-] displaced_city_mouse@midwest.social 7 points 1 year ago* (last edited 1 year ago)

Auto upvote for anything from Doctorow. Now off to RTFA.

Update: Spot on as usual. +1 for mentioning enshittification.

1

And just like that, SCOTUS affirms that someone's deeply held beliefs are more valid and in need of protection than someone else's reality.

16

A story on a local organization reaching out to help the unhoused in my current area. The director of the organization is quoted using the term "unhoused", but the reporter (or their editor) decided to use the more charged term "homeless" in the by-line and the article.

1

From the article, when talking about the "groomer" slur aimed at LGBTQIA+ people:

"...There’s no drag queens being arrested for sexual assault of children, that doesn’t happen,” Trixie said. “Do you know where that happens? The church, okay? That’s where. This whole country mollycoddles Christians and I’m fucking tired of it, tired of it!

Look forward to seeing the HiDPI scaling work on my laptop - tired of my login screen looking like crap...

1

R. Buckminster Fuller, creator of the buckyball, was a professor at SIU in Carbondale in the 1960's. At that time, he built and lived in a large buckyball home, which has been restored and will soon be a museum to the man and his legacy.

This is what Cory Doctorow calls "enshittification", and it's part of the reason I'm on Mastodon and Lemmy now.

1

A small town in southern Illinois reaches racial parity in their city council makeup, with a black mayor and equal number of black and white members. Oh, and they also have an openly trans council member as well...

This from a part of the state where some people still fly Confederate battle flags.

view more: next ›

displaced_city_mouse

joined 1 year ago