[-] MaxamillianStudio@r-sauna.fi 1 points 1 year ago

That being said I'm totally stoked about the Cedar I painstakingly removed. The Boards are 10 in. wide and the sauna was a perfect 8x8x8.

[-] MaxamillianStudio@r-sauna.fi 1 points 1 year ago* (last edited 1 year ago)

There is a terribly stamped label on the back, I might try to do a rubbing on when I get a minute. Found it! Metos Sauna Model NO. MSPO.

The good news is it is a single-phase heater. It was connected to a double pole 40 amp breaker with the Ground and Positive lines pigtailed in the Electric Box.

Here are some pics.

[-] MaxamillianStudio@r-sauna.fi 1 points 1 year ago

It is a 240V Metos Sauna (M75 I think). It still works surprisingly since the last Metos Sauna Heaters were made in 1983 aka 40+ years old. It does not have direct stone to Elements contact however which is a bummer.

3

Just Bought used sauna guts (Cedar and Heater). I believe it is a HomeCraft Commercial Heater but would like you help Identifying it for sure.

Also do you know if it is a wet or dry sauna heater?

Hoping it isn't Phase 3 as well.

MaxamillianStudio

joined 1 year ago