10
submitted 11 months ago by BobApril@lemmy.one to c/3dprinting@lemmy.ml

Hey, this is my first Printables contest entry - large (16 inch/40 cm) christmas balls that print in multiple pieces. They can be assembled is hollow frameworks, or around a playground ball for extra color.

19
submitted 1 year ago by BobApril@lemmy.one to c/3dprinting@lemmy.ml

Want to keep your filament dry while you print, but too cheap to shell out for a dry box? Make your own! My house goes through Tidy Cat tubs at a rapid rate, and they seal pretty well. I was using a PVC pipe structure on the inside, but I think these skate bearing roller stands will work better. Throw in a few desiccant containers and drill a couple holes in the side, and you're all set! (Humidity monitor optional.)

36

I finished the stands for my wife's set of Hocus Pocus decorations just in time - we're decorating this weekend!

The #FreeCAD files are included, and should be pretty easy to alter for whatever figure you'd like to put on them. Just edit the ShapeString to change the text, and adjust the strut and fork to fit the figure.

[-] BobApril@lemmy.one 2 points 1 year ago

Oh, absolutely, story/cast reasons were the real reason - but while assigning an Ensign to a Commander slot is extreme, assigning people above their rank and above higher ranks in the process is not completely unheard of, even in today's military. Given their utterly unique situation as an in-universe excuse, I don't have any real problem suspending disbelief on Tilly's assignment there.

[-] BobApril@lemmy.one 5 points 1 year ago

A couple of quibbles that no one else seems to have brought up. Ensign Tilly was not promoted to XO - she was assigned to the position of acting XO while remaining an Ensign. The designation of "acting" makes it clear she's just holding down the slot temporarily until Saru makes a more permanent selection, and makes it much more tolerable for those she's now in charge of despite the lower rank. It probably wouldn't have been tolerated (by the Admirals at Command) even in the lax standards of Starfleet, but even ADM Vance realized Saru had to pick from the tiny crew he brought to the future with him, so he let it go.

As for Ezri, again, remember that rank and position are only loosely connected, while rank and specialty (Counselor, science officer, engineer, navigator) are COMPLETELY unconnected. Ezri is a counselor because they wanted to make her distinct from Jadzia, and is an Ensign to highlight her inexperience both as a person and in dealing with a symbiote.

But yes, it does seem like the writers' familiarity comes and goes. I swear there are at least a few episodes (and I can't remember which series, because I'm alternating between three right now) where people refer to a Lt. Cdr. as "Lieutenant" instead of the proper term of address, "Commander."

[-] BobApril@lemmy.one 8 points 1 year ago

Yeah, I would definitely have added him to the center square.

[-] BobApril@lemmy.one 9 points 1 year ago

Short- and medium-term, anything that leads away from fossil fuel is a good thing. Long-term, though, it seems like taking energy that would normally have bypassed the Earth, capturing it, and then adding it into our ecosystem is probably a bad idea. I'm a total layman, here, though, mostly going off of what I've read in science fiction.

Also, yeah, the weapons potential is a problem, though I sort of feel like we've already got all the weapons we need to intentionally eliminate human life, so further refinements don't matter much. It's the accidental extermination we're worried about, and this might help with that for awhile.

9

Not my design. But since my wife loves both Doctor Who and Halloween, it was a natural choice for me to print. Also, it looks like no one else tried a mix of colors, so I wanted to see how it would look.

[-] BobApril@lemmy.one 2 points 1 year ago

That's still got to be orders of magnitude less than the externalized costs of the oil companies in the same time period - even just counting the costs to the UK gov't and population.

[-] BobApril@lemmy.one 3 points 1 year ago

They think this IS their business. I say that not to excuse or justify them. But we can't appeal to their "better natures," because they think they're in the right, that we are all not merely wrong but evil. That leaves us no room to convince them otherwise, because anything we might say is inherently vile deceit - their own chosen information sources have long ago convinced them that everyone else is lying.

So we simply have to beat them. Identify them, prosecute them as criminals (not as enemies nor POWs), and lock them away. Or, when they make it necessary in the moment of their violence, our police forces need to kill them.

[-] BobApril@lemmy.one 0 points 1 year ago

I'm guessing that painting them 96 different colors is going to take a little longer!

[-] BobApril@lemmy.one 1 points 1 year ago

I seem to recall Olympic athletes and reporters having some things to say about the air quality in China not too long ago. And that was AFTER a concerted effort by China to clean things up for the event.

[-] BobApril@lemmy.one 1 points 1 year ago

Nicely done! It looks like that's all native filament color, no paint - do you have a multi-color printer, or just patience to print a lot of little pieces?

10

A #Freecad design I'm pretty proud of, that still has plenty of room for further development/remixes. [(https://media.printables.com/media/prints/501388/images/4083988_85d5db22-6582-45b9-b28c-5bdcd0ea2b45/thumbs/inside/1920x1440/jpg/pxl_20230610_180129978.webp)]

2
submitted 1 year ago by BobApril@lemmy.one to c/3dprinting@lemmy.ml

One of the things I like best about designing and printing is having my wife idly talk about wanting something, and then being able to produce it for her. In this case, she has a doll she wants to decorate for the holidays/seasons. I pulled a set of Easter Bunny ears off Thingiverse, but then designed a headband with flags for the Indy 500 (month of May) and now rockets for July 4th. Working on other designs for later holidays.

[-] BobApril@lemmy.one 1 points 1 year ago

I am, both in printing and design. I'm running an Ender 3 V2. What's your pair, there? https://photos.app.goo.gl/MPCRzi1XaRTui7uy8

view more: next ›

BobApril

joined 1 year ago