5

cross-posted from: https://lemmy.world/post/6943084

I'm looking to upgrade my 16GB DDR4 RAM to 32GB DDR4. Currently I have the HyperX HX433C16PB3K2/16 kit installed. It seems this kit is not sold anymore. I'm not really keen on buying a whole new 32GB RAM kit.

I found this kit from Kingston that seems about the same. It's DDR4-3200 instead of DDR4-3333 I currently have. I'm aware that my old kit will then run slower but I don't mind. The latencies are the same.

Should this kit be okay to add or is it asking for troubles?

Datasheet old: https://www.kingston.com/dataSheets/HX433C16PB3K2_16.pdf

Datasheet new: https://www.kingston.com/datasheets/KF432C16BBK2_16.pdf

top 2 comments
sorted by: hot top controversial new old
[-] Pantherina@feddit.de 2 points 1 year ago

It will work 99% sure. But your Ram will be set to the slowest of the 2 clock speeds I suppose.

Afaik you can even use DDR3L and DDR3 together.

[-] Thermal_shocked@lemmy.world 1 points 1 year ago

I mix and match ram all the time in my personal systems (vms, test boxes, etc). Have never had an issue, just match speeds or it will down clock to the lowest speed.

this post was submitted on 17 Oct 2023
5 points (100.0% liked)

techsupport

2447 readers
3 users here now

The Lemmy community will help you with your tech problems and questions about anything here. Do not be shy, we will try to help you.

If something works or if you find a solution to your problem let us know it will be greatly apreciated.

Rules: instance rules + stay on topic

Partnered communities:

You Should Know

Reddit

Software gore

Recommendations

founded 1 year ago
MODERATORS