126
submitted 1 year ago by Thunder@lemm.ee to c/opensource@lemmy.ml

So I want te find the most feature rich smartwatch that doesn't send data to the manufacure. I have tried the Pinetime watch, but it died after 6 months.

Infinitytime (OS) was not realy that feature rish, so I want to secrufise an Open Source watch OS. But I still want to connect it with Open Source software, like gadged bridge.

What is my best option under €200? Maybe the Xioami Mi band 7 (€50) that is supported by gadgedbrigde?

top 50 comments
sorted by: hot top controversial new old
[-] Uranium_Green@sh.itjust.works 49 points 1 year ago* (last edited 1 year ago)

Personally this has been the most feature rich/open source one I could find, and it's what I ended up going for, there's an opensource app store, direct integration with gadgetbridge, a decent always on display much like the amazfit bip S, which also means a long battery life.

https://banglejs.com/

[-] giddy@aussie.zone 13 points 1 year ago

That’s the closest thing I’ve found to my dear departed Pebble

[-] notmyredditusername@lemmy.ml 8 points 1 year ago

This is pretty amazing, I was not expecting it to be such a reasonable price considering the specs. What's the battery life like?

[-] Uranium_Green@sh.itjust.works 4 points 1 year ago

It can get up to 4 weeks, though my experience is closer to 4 days to a couple of weeks, I think it depends heavily on what apps you're using, how much you're moving about and how much stuff you're installing

load more comments (1 replies)
[-] giddy@aussie.zone 4 points 1 year ago

That’s the closest thing I’ve found to my dear departed Pebble

load more comments (1 replies)
[-] ryannathans@aussie.zone 42 points 1 year ago

Casio with inbuilt calculator

[-] SaintWacko@midwest.social 27 points 1 year ago

If you can find a Pebble, they still work perfectly and the manufacturer doesn't even exist anymore!

[-] DoomBot5@lemmy.world 7 points 1 year ago

Hmm, fitbit bought most of the company, then Google bought them.

[-] DeltaTangoLima@reddrefuge.com 2 points 1 year ago

Shit! You just reminded me I have a Pebble Time, sitting in a drawer. I remember it being such a good watch, then I got distracted by the Samsung watch at the time.

Might see if there's any life in it and test it out with GadgetBridge.

[-] varsock@programming.dev 5 points 1 year ago* (last edited 1 year ago)

Rebble was easier to get working than gadget bridge. just something to consider

[-] DeltaTangoLima@reddrefuge.com 2 points 1 year ago

Thanks for that. Came across Rebble while searching for answers to problems getting the Pebble working with GB earlier today, so definitely looks like it's worth a go.

load more comments (7 replies)
[-] noodlejetski@lemm.ee 18 points 1 year ago* (last edited 1 year ago)

anything that's compatible with Gadgetbridge should be okay. it keeps everything on your phone and doesn't even request a network permission, so the device can't phone home.

incidentally, I've got the Mi Band 7 (connected via Gadgetbridge] and I quite like it.

[-] mulcahey@lemmy.world 5 points 1 year ago

This. I've been using the Fossil Collider HR with Gadgetbridge for over a year. I love it, and I love that it's keeping my data safe

[-] MetalAirship@lemmy.world 16 points 1 year ago

Pebble is peak smartwatch. Fight me on it, I wont change my mind. Its just smart enough, without being too smart. Battery lasts for days, its waterproof, and side buttons instead if some impossible to use tiny-ass touchscreen. Perfection.

[-] Linus_Torvalds@lemmy.world 11 points 1 year ago* (last edited 1 year ago)

Pebble is a discontinued smartwatch developed by Pebble Technology Corporation.

😶

[-] emptyother@programming.dev 3 points 1 year ago

Who got eaten up by Fitbit, who got eaten up by Google. 😭

[-] OhNoMoreLemmy@lemmy.ml 8 points 1 year ago

Garmin does that too if you want to buy something from a company that still exists.

[-] MDKAOD@lemmy.ml 2 points 1 year ago

Fossil offers a hybrid smartwatch now to full those shoes. I really liked mine when I had one, but it didn't fit my hands free needs well enough.

[-] solariplex@slrpnk.net 14 points 1 year ago

I've also used a pinetime running infinitime for the past year, and I agree that it's not exactly feature rich. I like it though.

I've heard that 'bangle.js' is an open source watch as well, with a decent feature set.

[-] const_void@lemmy.ml 10 points 1 year ago

Been pretty happy with my Garmin Instinct. It has a cloud connection of course but seems pretty decent privacy wise.

[-] mudeth@lemmy.ca 12 points 1 year ago

I love my Garmin watches but they aren't really known for privacy or security. They had a ransomware attack in 2020 and the Connect service was down. It's speculated that they paid the ransom.

[-] 0110010001100010@lemmy.world 4 points 1 year ago

Their support is top-notch as well. My Instinct started having serious battery life issues a few months out of warranty. They still replaced it no questions asked when I reached out to their support and asked if they offer a battery replacement service. That said, the Instinct at least isn't a true smart watch. It doesn't run apps, isn't touchscreen, don't have NFC, etc.

[-] sxan@midwest.social 10 points 1 year ago

I'm in the same boat. The buttons on my Pebble Time Steel are going, and I don't know what I'm going to replace it with.

the Pinetime watch, but it died after 6 months.

Oof, that's a shame. That was on my list of possibilities.

load more comments (3 replies)
[-] randomTingler@lemmy.world 8 points 1 year ago

I would say amazefit is the better option, check the compatibility with gardggetbride before buying.

I bought an Amazefit bip 3 years ago and am using Master for Amazefit, sadly the developer stopped updating the app. The watch/band supports only step counter, heart rate measure, sleep tracking. So, whatever options the app provides work fine for me.

I need to look for other app options when I upgrade.

[-] Cataphract@lemmy.ml 4 points 1 year ago

Sleep tracking? I'm ootl with smart watches in general so forgive this ignorant comment, but I assume for this to work...you have to sleep with the watch on?

[-] randomTingler@lemmy.world 6 points 1 year ago

Yes. Have to wear the watch while sleeping.

load more comments (2 replies)
[-] witx@lemmy.sdf.org 5 points 1 year ago

Pinetime by pine64

[-] mrpalmer16@lemmy.ml 5 points 1 year ago

I'm waiting for the next batch of Watchy's so i can't say if it is any good, but I have high hopes. They have a handy spec comparison chart between Watchy, Pine time, Bangle.js, and the beloved Pebble.

[-] exu@feditown.com 3 points 1 year ago

I have a Watchy. It's nice if you'd want to tinker easily, but it's very bulky and cheap in feel even compared to a pinetime.

[-] Emperor@feddit.uk 4 points 1 year ago

I've mad a MiBand 6 for a while now - seems solid and you could, in theory grab all the data from it and process it yourself (via the Notify app). I don't know exactly how bolted down it is privacy-wise though.

[-] SamsonSeinfelder@feddit.de 5 points 1 year ago

MiBand 6

The latest 7 looks very nice. 16 days battery life, 5 days with always-on apparently.... sadly if you want to pair it with your phone, you need the Xiaomi App and then (as OP asked) you get trapped in privacy Hell and send all your data (Health, Location, User Content, Financial Information, Contact Info and identifiers) to china. At least on iOS as I can read in the App-Store description. Bummer. It looks like a nice watch.

[-] iturnedintoanewt@lemm.ee 6 points 1 year ago* (last edited 1 year ago)

You can just use gadgetbridge after the initial pairing and key generation. You need to install the xiaomi app once in some burner phone with empty contacts, or maybe you can pair it without giving it access to contacts first. Once you have the key (described in the gadgetbridge guide) you can just dump the official app and use GB without using any xiaomi data/servers.

[-] Emperor@feddit.uk 2 points 1 year ago

You could always go with an older version - mine's never been on the Xiaomi app and is merrily feeding the data to my Raspberry Pi.

[-] SamsonSeinfelder@feddit.de 2 points 1 year ago* (last edited 1 year ago)

Ah, thats good to know. I also saw a blog post for a way to use it without the App by using a modded App APK on Android were you can extract the auth-Key... but that was way to complicated. I wish there were an open standard for digital watches to enable sync of data with the OS of choice without going through a proprietary app. I will look into the RPI Solution. Thanks.

[-] Emperor@feddit.uk 2 points 1 year ago

I imagine the manufacturers would fight that all the way to the courts.

As best as I can tell Notify for Mi Band isn't from Xiaomi, they produce a number of similar apps that give you control over your phone and a key that allows Home Assistant (and I am sure other services) to pull in the data and you are away. Apparently, it's a relatively recent update that means you don't have to do any workarounds - it's straight through the app and should work for all Mi Bands and Amazfits.

[-] fmstrat@lemmy.nowsci.com 4 points 1 year ago

What happens wit a Garmin watch if you uninstall the app? Mine still processes notifications/etc.

[-] iopq@lemmy.world 2 points 1 year ago

I got two Xiaomi bands, I think it was band 4, but neither work after like two years

Also sleep tracking sucks with gadget bridge, it was better with notify, so at that point it's crap hardware with closed software

load more comments
view more: next ›
this post was submitted on 01 Oct 2023
126 points (100.0% liked)

Open Source

31186 readers
210 users here now

All about open source! Feel free to ask questions, and share news, and interesting stuff!

Useful Links

Rules

Related Communities

Community icon from opensource.org, but we are not affiliated with them.

founded 5 years ago
MODERATORS