1279
It's incredible how much the prices have fallen and that's how it should be. Sure, I bought the 960 close to launch but still the difference is staggering.
The 960 Evo still chugs along albeit it's a new one because a few months after I bought it, I had to RMA it. I guess that's what happens when you are an early adopter. I lost a few hours of work when the original 960 Evo decided to stop working but it also taught me to be more paranoia with backups.
For over a decade I've been waiting for HDD prices to fall to 10 € per TB. Guess I'll see that in SSDs first.
Yup, there’s a Linustech tip video about this. HDD prices have kinda been set in stone for a good while now
Couldn't find it within 5 minutes of searching - therefor I accounce that such a video does not exist
Let me see if I can find it. LMG pumps out tons of videos
Could be hardware unboxed FAQ actually.
Are you still in there?
So, maybe HDD can hardly get any more cheaper as there is little to non room for improvement while SSD can get higher NAND transistors density.
Just since I've setup a plex server (about 8 years now) midrange sizes have gone from 4->16 TBs. Personally I think the bulk of the issue is that HDD customers switched from a mix of enterprise and personal, to nearly all enterprise. Companies really don't care if a HDD is $200 or $500, so basically all high capacity drives are priced at B2B prices, not consumer
do you think you can link the video?
For NAS purposes that'd be delicious.
Until you would have to replace a HDD: +23 hours of nerve racking RAID repair time for 10TB drive at 120MB/s Even with some advanced (like ZFS etc.) system you can't go around the fact the HDDs are slow.
And when the HDD fails, you can't read it. It's toast. Some cheap non-volatile memory devices are like this too, but good ones go into read-only mode and you can at least attempt data recovery from them if no better option is left.
I'm liking that it is possible get cheap+good 1TB NVMe devices for less than 100€. The consumer SATA market for large SSDs (capacity over 1TB) is unfortunately quite dry. I need replacement for HDDs and even if the speed is capped by SATA bus it would be an massive improvement.
That repair time is the bear. Particularly as so many consumer grade NAS device really don’t have the horsepower for it. System works great until you have to rebuild an array. When that time comes don’t plan on doing much of anything while it’s grinding for the next few days.
https://youtu.be/5QH8Dj6g_Nk Might be what OP watched too. I was surprised they've gotten so cheap.
Here is an alternative Piped link(s): https://piped.video/5QH8Dj6g_Nk
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I'm open-source, check me out at GitHub.
Most excellent bot
That's a good point. Maybe I should upgrade my NAS to have SSD's now.
HDD probably cost more to manufacture