Need Server Recommendations (lemmy.dbzer0.com)

submitted 7 months ago by GasMaskedLunatic@lemmy.dbzer0.com to c/homelab@lemmy.ml

33 comments fedilink hide all child comments

I want to build a proper server with room for 40+ HDDs to move my media server to and have RAID 1. I know a lot about PCs and software, but when it comes to server hardware I have no clue what I'm doing. How would I go about building a server that has access to 40+ RAID 1'd HDDs?

you are viewing a single comment's thread
view the rest of the comments

[-] GasMaskedLunatic@lemmy.dbzer0.com 1 points 7 months ago

Doesn't that keep more than two copies? RAID 1 is expensive enough as is. I just need to be able to pop in a replacement drive if one fails so I don't lose data.

[-] redditron_2000_4@lemmy.world 2 points 7 months ago

The chance of a rebuild taking longer than a failure occurring is non zero. RAID 1 is less protection that raid 50 or raid 60, plus depending on how many disks you have you will save space and get better performance.

But you need a good controller.

[-] GasMaskedLunatic@lemmy.dbzer0.com 1 points 7 months ago

I'll have to watch a video later I guess. I know it's possible to lose a drive while it's rebuilding, but it's improbable, and I figured it takes more space, I'm okay taking that risk since I'm not handling irreplaceable data, just my personal TV/movie archive for now. But if it can save space, I'll have to consider it.

[-] computergeek125@lemmy.world 3 points 7 months ago

It is far less improbable than you think, especially if all of your drives have similar age/wear - as would be the case if you bought all 40 around the same time.

this post was submitted on 12 Apr 2024

28 points (100.0% liked)

homelab

6602 readers

1 users here now

founded 4 years ago

MODERATORS

CMonster@lemmy.ml