19
submitted 7 months ago* (last edited 7 months ago) by Blxter@lemmy.zip to c/selfhosted@lemmy.world

Edit: So a solution I just found is that if I remove the second DNS from my router (1.1.1.1) then all traffic goes through adguard. This works but if I go on vacation and my parents are still home and this device dies or something then my mom will have no idea what to do...

Hello,

I have adguardhome running on a raspberry pi via docker compose. I once had tailscale installed on it but it has sense been uninstalled.

Using for example my phone when at home if it is on my tailnet the adguard works as intended and blocks ads trackers etc. But If at home and disconnected from my tailnet it does not go through adguard at all. So all my family members do not have the benefit of this and anything not on my tailnet. I would rather have it work for everyone and not sure how to fix or where I went wrong in the setup.

For the setup guide for adguard it says

AdGuard Home DNS server is listening on the following addresses: 127.0.0.1 172.18.0.2

So I added 172.18.0.2 to my /etc/systemd/resolved.conf file because before it had only DNS=127.0.0.1. This seems to have not worked unless I need to restart for it to take effect looks like this now

# Entries in this file show the compile time defaults. Local configuration
# should be created by either modifying this file, or by creating "drop-ins" in
# the resolved.conf.d/ subdirectory. The latter is generally recommended.
# Defaults can be restored by simply deleting this file and all drop-ins.
#
# Use 'systemd-analyze cat-config systemd/resolved.conf' to display the full config.
#
# See resolved.conf(5) for details.

[Resolve]
# Some examples of DNS servers which may be used for DNS= and FallbackDNS=:
# Cloudflare: 1.1.1.1#cloudflare-dns.com 1.0.0.1#cloudflare-dns.com 2606:4700:4700::1111#cloudflare-dns.com 2606:4700:4700::1001#cloudflare-dns.com
# Google:     8.8.8.8#dns.google 8.8.4.4#dns.google 2001:4860:4860::8888#dns.google 2001:4860:4860::8844#dns.google
# Quad9:      9.9.9.9#dns.quad9.net 149.112.112.112#dns.quad9.net 2620:fe::fe#dns.quad9.net 2620:fe::9#dns.quad9.net
DNS=127.0.0.1 172.18.0.2
#FallbackDNS=
#Domains=
#DNSSEC=no
#DNSOverTLS=no
#MulticastDNS=no
#LLMNR=no
#Cache=no-negative
#CacheFromLocalhost=no
DNSStubListener=no
#DNSStubListenerExtra=
#ReadEtcHosts=yes
#ResolveUnicastSingleLabel=no

docker-compose file

version: '3.3'
services:
    run:
        container_name: adguardhome
        restart: unless-stopped
        volumes:
            - '/home/Blxter/server/compose/adguard-home/config/adguardhome/workdir:/opt/adguardhome/work'
            - '/home/Blxter/server/compose/adguard-home/config/adguardhome/confdir:/opt/adguardhome/conf'
        ports:
            - '53:53/tcp'
            - '53:53/udp'
            - '67:67/udp'
            - '68:68/udp'
            - '68:68/tcp'
            - '80:80/tcp'
            - '443:443/tcp'
            - '443:443/udp'
            - '3005:3000/tcp'
        image: adguard/adguardhome

Not sure what other info is needed to help moderately new to this Thanks

you are viewing a single comment's thread
view the rest of the comments
[-] untilyouarrived@lemm.ee 1 points 7 months ago

You could try setting adguard to listen on all interfaces?

[-] Blxter@lemmy.zip 1 points 7 months ago* (last edited 7 months ago)

I believe it is https://www.reddit.com/r/Adguard/comments/nfe86r/is_it_possible_to_reconfigure_listenning/ top of the AdGuardHome.yaml file

Edit: formatting is a little off

http:
  pprof:
    port: 6060
    enabled: false
  address: 0.0.0.0:80
  session_ttl: 720h
users:
  
  name: Blxter
  password: 
auth_attempts: 5
block_auth_min: 15
http_proxy: ""
language: ""
theme: auto
dns:
  bind_hosts:0.0.0.0
port: 53
anonymize_client_ip: false
ratelimit: 20
ratelimit_subnet_len_ipv4: 24
ratelimit_subnet_len_ipv6: 56
ratelimit_whitelist: []
refuse_any: true
this post was submitted on 30 Mar 2024
19 points (100.0% liked)

Selfhosted

40152 readers
435 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules:

  1. Be civil: we're here to support and learn from one another. Insults won't be tolerated. Flame wars are frowned upon.

  2. No spam posting.

  3. Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it's not obvious why your post topic revolves around selfhosting, please include details to make it clear.

  4. Don't duplicate the full text of your blog or github here. Just post the link for folks to click.

  5. Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).

  6. No trolling.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

founded 1 year ago
MODERATORS