submitted 9 months ago by Lime66@lemmy.world to c/buildapc@lemmy.world

29 comments fedilink hide all child comments

I finished building my PC recently. when I turn on the monitor when the computer isn't on, there's obviously no signal and I see the bouncing logo, but when the computer is on, it says that there is no signal, and that my monitor is going into standby mode, and the display turns off. my gpu seems to be working fine, and I reseated my ram. What should I do?

you are viewing a single comment's thread
view the rest of the comments

[-] Exulion@lemmy.world 1 points 9 months ago

Try reseating your CPU, check the pins to make sure you didn't bend one. Taking some photos and zooming in can help you get a better look.

[-] Lime66@lemmy.world 1 points 9 months ago

According to the manual all of the lights are supposed to turn on briefly.

[-] Exulion@lemmy.world 2 points 9 months ago

Sorry got busy and work. Any luck? None of lights stay on?

If not I would just double check and reseat everything, and for shits and giggles pull the cmos battery for 30s and put it back, if you haven't already.

If nothing else works I would be thinking about RMAing the mobo.

[-] Lime66@lemmy.world 1 points 9 months ago

Only the boot light stays on even though I have a boot device. (And am trying to boot into bios)

this post was submitted on 11 Feb 2024

13 points (100.0% liked)

Buildapc

3769 readers

20 users here now

founded 1 year ago

MODERATORS

Lemmenmo@lemmy.world