532
submitted 11 months ago by ylai@lemmy.ml to c/technology@lemmy.world
you are viewing a single comment's thread
view the rest of the comments
[-] monkeyman512@lemmy.world 28 points 11 months ago

If it still has working USB you can hook it up to a $10 raspberry pi with wifi to act as a print server. I can understand if that's a more ambitious tech project than your ready to take on.

[-] user224@lemmy.sdf.org 7 points 11 months ago

There also used to be network printer adapters in the past. For example, the Belkin F8T030 Bluetooth AP. Yes, Bluetooth AP. I'd like something like that just for fun. Perhaps not this one specifically, as it only supports BT-LAP out-of-the-box and requires firmware upgrade for BT-PAN. Good luck finding firmware for a niche product from 2003.

But anyway, perhaps something like that (the printer part) is still made.

[-] LifeInOregon@lemmy.world 6 points 11 months ago

The old Apple AirPort Express could turn any USB printer into a networked printer.

[-] projectsquared@lemmy.world 4 points 11 months ago

Absolutely this. Find them online for $10 all day.

[-] pearsaltchocolatebar@discuss.online 4 points 11 months ago

I'm a systems engineer, so it would be a short project for me. My homelab router could run the print server, but the USB port is currently powering my pi hole.

I feel like there would be some way to rig an esp32 or similar micro controller to do the same thing (pis can be scarce atm

[-] mosiacmango@lemm.ee 1 points 11 months ago

A powered plugin usb hub would likely be easier.

[-] pearsaltchocolatebar@discuss.online 2 points 11 months ago

But not as fun as making my own.

[-] mosiacmango@lemm.ee 2 points 11 months ago* (last edited 11 months ago)

Entertainment always wins over efficiency.

[-] pearsaltchocolatebar@discuss.online 1 points 11 months ago

Security too. I dont trust 90% of internet connected devices.

[-] frezik@midwest.social 1 points 11 months ago

Rpi stock issues are well behind us. You can buy them straight up now. Even the 1GB RPi4.

Esp32 may not have enough RAM to buffer large prints, especially if there's a lot of graphics. It is possible to give it up to 4MB of external RAM, but that's still not much.

Pi Pico can do a 16MB external RAM chip. That's starting to be adaqute.

I had an HP 5si for a while with 20MB of internal RAM. It struggled with Postscript printing--could only buffer and print one page at a time. Did fine with HP's own PDL drivers, though.

[-] pearsaltchocolatebar@discuss.online 1 points 11 months ago

I still had some trouble getting the Zero 2Ws, but a lot of sellers still have a limit of 1 per order.

I'll probably use my Zero W for the print server once I replace the controller for my snake's enclosure with a 2.

this post was submitted on 19 Jan 2024
532 points (100.0% liked)

Technology

60042 readers
2435 users here now

This is a most excellent place for technology news and articles.


Our Rules


  1. Follow the lemmy.world rules.
  2. Only tech related content.
  3. Be excellent to each another!
  4. Mod approved content bots can post up to 10 articles per day.
  5. Threads asking for personal tech support may be deleted.
  6. Politics threads may be removed.
  7. No memes allowed as posts, OK to post as comments.
  8. Only approved bots from the list below, to ask if your bot can be added please contact us.
  9. Check for duplicates before posting, duplicates may be removed

Approved Bots


founded 2 years ago
MODERATORS