155
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 20 Dec 2023
155 points (100.0% liked)
Ask Men
1244 readers
1 users here now
A community to ask men questions and discuss any and all issues relating to them.
Unlocking Perspectives, Advice, and Empowerment for Men Everywhere.
Rules
Follow the rules of lemmy.world, which can be found here.
Additionally:
- Be respectful and inclusive.
- No harassment, hate speech, or trolling.
- Engage in constructive discussions.
- Share relevant content.
- Follow guidelines and moderators' instructions.
- Use appropriate language and tone.
- Report violations.
- Foster a continuous learning environment.
Notes
- The title of your post should contain the actual question being asked.
P.S, Would you like to help with moderating AskMen? Send a PM to the top mod.
founded 1 year ago
MODERATORS
Surely they meant “garage door spring”, which can be quite dangerous if you don’t know what you’re doing while replacing them.
Yup. (during install) You often use two short 1/2" steel rods to wind tension into the spring, using one to hold the tension while you move the other to the next position and/or lock down the set screws that keep it in place.
If you do this incorrectly and slip, that spring will unwind in a hurry and usually throw one of those ~5lb steel rods with enough force to put it through a wall.
One of those hits you you're gonna have a bad time.
I can't even explain it... but this is easily one of the most terrifying things I've done. It's not complicated, just nerve wracking...
Those are the torsion ones. The tension spring kind will just whip you with a steel cable that's going fast enough to amputate fingers.
Always put the spring in its least tensioned position (door up) before fucking with it.
If you can... Often the door in the up position blocks access to the springs, leaving you no choice but to do it door down. Part of the reason it's so dangerous. Wouldn't have to manually build so much tension if you could leave the door up to install them.
Yeah I did that once. Scary as fuck. I definitely kept my body off to the side and made absolutely certain that I had the bars fully seated. Still, probably not going to do it myself next time.