this post was submitted on 18 Nov 2023
71 points (100.0% liked)
Steam Deck
5979 readers
1 users here now
Universal community link
!steamdeck@lemmy.ml
Rules
- (All of lemmy.ml rules applies)
- Post must be related to the Steam Deck
- No politics
- No drama, we're here to enjoy the Steam Deck
- Don't spam emojis in the comments, be constructive
Models
64GB eMMC LCD
- 64GB eMMC SSD
- 1280 x 800 optically bonded LCD
- 7" Diagonal display size
- up to 60Hz refresh rate
- 7 nm APU
- Wi-Fi 5
- 40Whr battery; 2-8 hours of gameplay (content-dependent)
- 45W Power supply with 1.5m cable
- Carrying case
256GB NVMe LCD
- 256GB NVMe SSD
- 1280 x 800 optically bonded LCD
- 7" Diagonal display size
- up to 60Hz refresh rate
- 7 nm APU
- Wi-Fi 5
- 40Whr battery; 2-8 hours of gameplay (content-dependent)
- 45W Power supply with 1.5m cable
- Carrying case
- Steam profile bundle
512GB NVMe LCD
- 512GB NVMe SSD
- 1280 x 800 optically bonded LCD
- 7" Diagonal display size
- up to 60Hz refresh rate
- 7 nm APU
- Wi-Fi 5
- 40Whr battery; 2-8 hours of gameplay (content-dependent)
- 45W Power supply with 1.5m cable
- Carrying case
- Steam profile bundle
512GB NVMe OLED
- 512GB NVMe SSD
- 1280 x 800 HDR OLED display
- 7.4" Diagonal display size
- up to 90Hz refresh rate
- 6 nm APU
- Wi-Fi 6E
- 50Whr battery; 3-12 hours of gameplay (content-dependent)
- 45W Power supply with 2.5m cable
- Carrying case
- Steam profile bundle
1TB NVMe OLED
- 1TB NVMe SSD
- 1280 x 800 HDR OLED display
- 7.4" Diagonal display size
- up to 90Hz refresh rate
- 6 nm APU
- Wi-Fi 6E
- 50Whr battery; 3-12 hours of gameplay (content-dependent)
- 45W Power supply with 2.5m cable
- Carrying case
- Steam profile bundle
- Exclusive startup movie
- Exclusive virtual keyboard theme
Allowed languages
founded 3 years ago
MODERATORS
Undervolting aims to keep the same performance at a lower power draw. But because modern SOCs scale their frequency dynamically based on temperature, a lower voltage means slightly better performance
Oh interesting. Makes sense. Any idea why they don’t tune it like this from the factory? Stability?
Yes. Essentially, every chip coming out of the fab will be slightly different, so you need to find a voltage curve that works for all of them. Some will be able to work with - 50mv, some -15, some won't work at all unless they're right at that factory defined voltage.