244
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 09 Nov 2023
244 points (100.0% liked)
Linux
48159 readers
519 users here now
From Wikipedia, the free encyclopedia
Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).
Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.
Rules
- Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
- No misinformation
- No NSFW content
- No hate speech, bigotry, etc
Related Communities
Community icon by Alpár-Etele Méder, licensed under CC BY 3.0
founded 5 years ago
MODERATORS
Thanks for the tip, but I know, what I was talking about 😅
I use IDE HDD with this machine. The mobo has several SATA ports, but my HDD is IDE, it's not a mistake.
Tho, that setting is, indeed is IDE, so I might set it to AHCI for Serenity, but the drive is still hoiked into the IDE bus.
But if the problem is the fact, that I'm trying to use IDE and should try with a SATA drive, I'll look into it as soon as I can.
And thanks for co-piloting ;)
This part actually makes me wonder... Do you think SerenityOS uses the Linux kernel? Because it does not, it's its own completely separate thing. And the hardware support for anything other than the standard emulated machine is very iffy, so it doesn't seem too surprising that it would get tripped up by something on an old computer.
If anything went wrong with its USB stack for example, the kernel would have no way to find the root filesystem that's stored on a USB drive.
At the weekend I'll have some time to fiddle with it.
I think I'll try to boot Serenity first from USB, check if it wants to boot at all. Maybe I'll got an Arduino to use as serial monitor to check the log.
Then move on to flashing the grub image to the HDD, again, with a different IDE drive. if thst doesn't work, I'll find a SATA HDD and flash that.
I really wanna see this OS boot on real hardware. Then take a good lookaround and develop or port something for it :)