I made this about a year ago and it's one of my favorite creations. Even though I made a mistake in measuring the bottom and had to cut out some slots. One day I'll print it again, but it used a ton of filament and took forever last time.
Whether you found an interesting idea online or want to showcase your personal organization setups or ideas, please feel free to take part and help our community grow!
While posting and commenting in this community, you must abide by instance-wide rules: https://mastodon.world/about
Failure to follow these guidelines will result in your post/comment being removed and/or more severe actions. All posts and comments will be reviewed on a case-by-case basis. This means that some content that violates the rules may be allowed, while other content that does not violate the rules may be removed. The moderators retain the right to remove any content and ban users. We ask that the users report any comment or post that violates the rules, and to use critical thinking when reading, posting or commenting.
Thanks! I had to split this in 6 prints and connect them after. Each one took around 12 hours to print and used around 1.5kg of filament, IIRC. But this was one of my early projects and I would change a lot knowing what I do now to use less filament and less printing time. Filament is not too expensive. Around $15-20 a 1kg roll. You can spend a lot more or a lot less depending on brand/quality and sales though. Still a lot cheaper than buying a nice organizer bin and this one is customized to fit my silverware and drawer. It's my favorite hobby ever!
Next time, print forms and create a mold. You'll spend a whole hell of a lot less money and you can make it food safe by applying wood putty and sanding the forms.
I might do that myself now....