9
submitted 1 year ago by Gordon@lemmy.world to c/espresso@infosec.pub

Let's start with the obvious answers, "Just weigh the dang beans", "Just get the single dose hopper", "Just clean more often", and my personal favorite, "Just spend more money".

Now that that's out of the way...

I'm tired of fiddling with my grinder. I started my espresso journey with a cheap steam unit and a whirly blade grinder. The grinder was quickly replaced with an Encore, and the steam toy was replaced with a second hand Gaggia Classic.

After a few years I realized I hated weighing beans every day, and realized that the steps on the encore were too big to truly get the most of my espresso setup so I bought a Sette 270i.

For about a year it worked admirably. I rarely cleaned it, but it never seemed to falter.

However as the 2nd year passed and now the 3rd year is waning, the grinder is becoming more and more finicky.

I should explain that in my mind, the entire point of buying the Sette over the Vario or any of the other stepless grinders on the market was the time based grinding.

I'll always remember when I first got it, I got 18g out in 5.85 seconds.

Slowly it crept up to the 6.5-7 second range but I figure that was normal.

But now in the 3rd year it's taking 10.5 seconds to get approximately 18g out.

Why approximately? Well sometimes it's 16. Sometimes 20. Other days 17.4. Very rarely do I actually get 18.0 grams out.

There doesn't seem to be any trend or logic to it, but whenever it starts to drop down to 16 regularly I figure it's about time to clean it, so I remove the hopper and lower burr and give it a good scrub with the included brush.

The lower burr is never really what you'd call dirty, but it makes me feel like I've done something I guess. Plus, that is always the first thing anyone says to do when you say you are having grinder troubles. Gotta clean it out!

I called Baratza support and they recommended using a lighter roast.

As expected, that shortened the time to get approximately 18g out, but the inconsistency didn't improve, and I was reminded why I don't really like light roasts for espresso.

What beans am I using? Why not use what I used when I first got the grinder? I am. They are from a local roaster, same beans I've been using from the same guy for 8-10 years now. Fresh roasted, I'd call them medium - medium/dark, and $10/lb. No, not $10/12oz bag. Pound. 16 full ounces. And $10 cash. But anyway, the guy is like 80 years old, been roasting coffee in the same building for 60 years or something, I figure he knows what he is doing.

I call back Baratza. They offer to send me a free single dose hopper and recommend I weigh the beans.

No.

Also, what about the inconsistency?

You see, if on one of those days where I only get 16g out, I continue grinding until there is 18g in the portafilter, the espresso machine nearly acts as if I have installed a blank disc. Instead of a shot taking 30ish seconds to pull it may be 50-60 seconds or more. Clearly something else is going on.

Baratza support: "Oh, well when that happens it's because the coffee is getting stuck in the chute and getting reground until it is much finer than normal, you should clean it more often, here watch this video on how to clean"

Me: ಠ⁠_⁠ಠ

Anyway.

I don't want to spend $3000 on a Mahlkonig, and I'm just too skeptical about time-based grinding at this point and too cheap to spend $800 just to try out a Eureka Mignon and hope it's better, so I guess I'll just keep cleaning my Sette unless anyone has a different suggestion.

And thank you for reading all this.

you are viewing a single comment's thread
view the rest of the comments
[-] KnowLimits@lemmy.world 2 points 1 year ago

Oxo makes a grinder with a scale, which has been working well for me for a few years with no cleaning. l did have to modify it a bit to remove a safety thing and attach a bent wire to the top of the blade to stir the beans to help them feed, since the angle of the bottom of the hopper is too shallow. But it wasn't very expensive.

this post was submitted on 17 Jun 2023
9 points (100.0% liked)

Espresso

1875 readers
1 users here now

Strong, potent coffee news for strong, potent coffee lovers.

Hoping to mirror the great community of r/espresso.

We are a kind and accepting community for those who love, want to love, are getting into, or are interested in espresso and espresso accessories.

Rules

I didn't think we needed this section on Lemmy, but...

(No exceptions)


Resources

Here is the main resource from the same sub, since it's amazing.

If any of the original mods, or anyone else who loves espresso, would like to take control or help mod, please let me know. I'd be as happy to help as to pass the reigns.

A gracious community member has added some of the resources from the Reddit sub.


(I tried to grab all of the links from it, please let me know if I missed any)

<Wiki from r/espresso>

Links

Google Sheets List of Espresso Machines

Espresso Aficionados - Discord

Espresso Aficionados - Wiki (as of May 2023, this is the most up-to-date resource for machine recommendations and it has a bunch of detailed guides for how to dial in espresso, puck prep & troubleshooting, and more advanced techniques!)

Espresso 101 Espresso starts with the coffee bean. Fresher is better. As u/Beans_McGhee says, "The beans really need to be roasted within the month you use them for perfect espresso." Store-bought beans are fine, really—but part of the "fun" of espresso is trying different beans.

You grind your coffee beans using a grinder. This sub has lots of opinions on grinders.

The amount of ground coffee you use is called the dose. So when u/SingularLattice says, "Make sure you have the right dose for your basket", that's what he means.

A basket is the little metal cup that goes in your portafilter—that's the metal thing with a handle on it. Espresso machines often come with 4 baskets: a single and a double in both unpressurized and pressurized. Doubles are the larger ones; pressurized variants are a different shape and may say "dual wall" on the bottom.

You would use dual-wall if you are using pre-ground coffee. Almost everyone will make ("pull") double shots—when you get into weights and times, it's all based on a double. So you should likely use the unpressurized (single wall) double basket.

Advanced practitioners will dose by weight. Typically, you'd want ~7g for a single shot and ~18g for a double shot. Automatic grinders may dose by time: this will get you "close enough". Thus, the "single" dose will be around 7g and the "double" will be around 18g. (You can fine-tune these amounts—more on that later.)

Coffee grounds are light and fluffy, but you want them to be compact for espresso, so you tamp them (with your tamper). Advanced practitioners will calibrate their tamping pressure (e.g., with spring-loaded tampers)—don't worry about that. Just give it a reasonable amount of force. If you're putting your whole body weight on your tamper, that's too much.

You will get a feel for the right amount of force. You can also look at the level of the grounds in the basket. Use shape of your tamper or other tool to estimate how much space should be between your (tamped) grounds and the top of the basket.

As u/SingularLattice says, "You need to tamp FLAT, not hard. So long as it’s firm, you’re good."

At the advanced level, preparing espresso is all about ratios, namely weight and time. Generally, you want a 2:1 ratio in about 30 seconds. The 2:1 ratio means the ratio of your dose (i.e., ~18g) to the resulting espresso (i.e., ~36g). The process of brewing espresso is called extraction.

Many espresso machines will do this for you! When you press the double shot button, it will dispense enough water to make the "right" amount of espresso... presuming you're using the right basket and the right dose! With such machines (e.g., the Breville Barista Express, or BBE), what you should do is watch the pressure gauge. It should be in the "espresso range". (Advanced practitioners will measure pressure in bars—you want ~9 bars in an ideal world.)

If the pressure is low, you either need more grounds (higher dose)—which you can get by adjusting the grind amount—or a finer grind—which you can get by adjusting grind size. You may also need to tamp harder, but typically this isn't the problem.

(If your pressure is too high, the inverse is true... but this doesn't happen very often.)

Every bean is different, and so needs different settings to produce a good result—in your case, to keep that pressure dial where you want it. The process of adjusting these different settings is called dialing in.

Your goal here is a well-extracted shot. That's all about how it tastes! Espresso should be sweet and balanced. If it's sour, it's under-extracted (to which you would grind more and/or finer); if it's bitter or astringent, it's over-extracted (to which you would do the opposite).

Everyone here is adjusting all these variables (bean, pressure, grind size, dose, ratio, extraction time, and more) in search of the perfect shot!

(Derived from this post by u/basseq.)

What espresso machine should I buy? Great question, and a very common one. Generally, there are two key inputs:

How much do you want to “tinker” with your espresso? Do you want to play with different variables, or just wake up to a good coffee?

How much do you want to spend?

Espresso can be a very expensive hobby, so the answer to the second question can you get to the best bang for your buck.

Remember that espresso is not just the machine. The other notable expense is the grinder, which can be as much as—if not more expensive—than the machine itself. There’s also some key accessories (notably a scale) and the cost of good coffee itself ($15+/lb).

Recommendations by Budget <$500 – Bare Bones If you’re looking to step up from a Nespresso or just drink less Starbucks, start here. There are really two ways to go:

Manual ($250–$300) – Flair Neo ($125) + 1Zpresso JX ($130).

Automatic ($450–$500) – Breville Bambino ($350) + Baratza Encore ($170).

The DeLonghi Dedica ($350) is also a solid choice. For grinders, you can also check out the Breville Dose Control ($150), or upgrade to the 1Zpresso J-Max ($230). The Sette 30 ($300) and Mignon Notte ($320) grinders are solid, but may put you above $500.

If you’re really looking to do espresso on the cheap, forego the grinder and work with pressurized portafilters on the Neo or Bambino. Many of us started with things like the DeLonghi EC155 ($100), but it’s hard to recommend.

Keep in mind that the espresso you get in a cafe was ground on a grinder that cost around $2000 and brewed on a machine that cost at least $15,000. You can't shrink all of that into a sub $300 setup without a huge loss of quality. –u/MyCatsNameIsBernie

$500–900 – Entry Level If you think you’re “serious” about espresso, this may be a better entry point than above, which you might outgrow sooner than later. There are two common choices here:

All-In-One – Breville Barista Express ($750) or Pro ($850). While the community sees the built-in grinder as the weak spot (no upgrade path), and long-term reliability can be spotty, it an easy and popular entry point into the prosumer market.

Separate Setup ($800–900) – Gaggia Classic Pro ($500) + Baratza Sette 270 ($400) – The Gaggia is a classic and time-tested, with lots of options in the used market.

Something like a Bambino Plus ($500) or Lelit Anna ($570) might also work. There are a lot of good grinders in this range: the DF64 ($400), Eureka Mignon Silenzio ($470), Baratza Vario ($480), and Rancilio Rocky ($430) are all well-regarded.

If you’re strapped for cash, the r/espresso guidance is to prioritize the grinder. Better to run a cheaper machine (Bambino/Dedica) with a nicer grinder than the other way around.

$900–$1,500 – The Standard The endgame for many people, this range is probably the “sweet spot” for great espresso without going over the deep-end.

The r/espresso Standard – Rancilio Silvia ($850) + Niche Zero ($680) – The Silvia is a classic, moddable, and can be found used. For this price range, the alternate choice might be something like a Lelit Glenda ($900), or pairing a Gaggia with a nicer grinder. For grinders, ECM and Profitec both have offerings ($550), Baratza Vario W+ ($600), Eureka Mignon Specialita ($700), or any of the ones in the previous category. You can start mixing and matching machines and features and specs.

$1,500–3,000 – Prosumer We’re getting heavily into the “prosumer” market now, and there are less common machine+grinder pairings, so we’ll start looking at them separately.

Machines – Profitec Pro ($1,800), ECM Classika ($1,600), Lelit Elizabeth ($1,700), Rocket Appartamento ($1,700). The land of shiny chrome and lots of knobs. The Breville Dual Boiler ($1,600) is in this range too.

Grinders – Mazzer Mini ($800), Mahlkonig X54 ($750), Eureka Oro ($800).

$3,000+ – Dream Machines From here, it’s dream machine land and the art of the possible. If you’re asking, “What should I buy,” you probably shouldn’t start here.

Machines – Lelit Bianca ($2,900), ECM Synchronika ($3,200), Decent DE1 ($3,500), plus some offerings from Isomac, Rocket, Elektra, or Nuova Simonelli. You get into true “endgame” machines like La Marzocco Linea Mini ($5,900) or Slayer Single Group ($10,000).

Grinders – Eureka Atom 75 ($1,400), Mahlkonig E65S ($2,300), KafaTek Monolith Flat ($2,500), Weber EG-1 ($3,700).

founded 1 year ago
MODERATORS