5
submitted 1 year ago* (last edited 1 year ago) by deepthaw@lemmy.sdf.org to c/retrocomputing@lemmy.sdf.org

Wanted to get back into the DOS era of software and games (it’s what I grew up on.) I would have preferred something older, but I ended up with a Slot 1 Pentium III/500. Fortunately it has an ISA slot so all the truly DOS friendly sound cards.

Specs: Gateway 4W4 Something Pentium III/500 384MB Yamaha YMF715 ISA sound card (SoundBlaster Pro and OPL3) S3 Trio 3D/2X AGP mt32-pi (Roland MT-32 and General MIDI) Generic Compact Flash-IDE adapter Gravis Gamepad that still has that little joystick you screw in. 20” Dell Trinitron (forgot the model)

Testing it with Tyrian here, but my plan is to play through Ultima Underworld soon on it.

What’s everybody else’s vintage computer of choice?

you are viewing a single comment's thread
view the rest of the comments
[-] prokyonid@lemmy.sdf.org 0 points 1 year ago

Someone on the SDF Mastodon got bent out of shape because I suggested a computer with those specs might be considered 'retro', haha.

Right now, the only retro machines I have accessible are my Tandy 1000TX and my C64, but my actual preferred machine for most things retrocomputing is one that I built out of a bunch of my spare parts:

Biostar M6TLC Slot 1 Motherboard PGA 370 Slotket 500MHz Mendocino Celeron PGA370 CPU 128MB of 168 pin SDRAM Sparkle SP5200 RIVA TNT2 Vanta AGP Soundblaster 16 CT2940 ISA 3Com Etherlink III ISA 1.44MB FDD, DVD-ROM, 20GB HDD Running MSDOS 7.1 (stripped from Windows 98SE)

The only picture I have of it was taken in the dark with a Mavica, so I won't bother posting it, haha.

[-] deepthaw@lemmy.sdf.org 0 points 1 year ago

What makes hardware “retro” is certainly an interesting question. This machine is 24 years old, although I’m using it to recreate an experience closer to thirty years old.

At the same the Pentium III came out, the Apple II line would have been 22 years old. Was the Apple II considered “retro” in 1999? It was only six years discontinued at that point…

I think retro will invariably be the generation of computer the person in question used as a youth. Maybe.

[-] cognitivegears@lemmy.sdf.org 0 points 1 year ago

This has come up a lot in the past, and the best I’ve been able to come up with is that what is “retro” varies with every retro enthusiast. A couple of definitions that I’ve heard:

  1. Retro is the computers you used as a kid. Leaves just about everything as “retro” to someone, but probably the best definition I’ve found anyway
  2. Any computer simple enough to be completely understood by an enthusiast. Older computers that came with full schematics fit into this category, and helps define the appeal of retro computers. It does leave out a lot of systems that younger generations would consider “retro” though.
  3. Some specific year cutoff (say 1990 or something.) Definitely the least flexible definition and one that I’m not a huge fan of.
  4. Based on architecture. 16-bit and older, or everything before the IBM PC etc. Again this isn’t a very flexible definition either, but has been used in the past by some (including by VCF-MW, though this has changed)
[-] kalleboo@lemmy.world 1 points 1 year ago

Yeah this is a hot debate in the Vintage Apple community as well. A lot of groups put the line at Intel Macs - anything PowerPC and older gets to count as vintage. That aligns with my interests but the first Intel Macs are soon 20 years old, and that cutoff is starting to make less sense if you look at what was accepted when the communities started out.

At this point personally I would personally consider anything from before Steve Jobs death as vintage Apple. Or at least anything from the Big Cats and before.

this post was submitted on 08 Jun 2023
5 points (100.0% liked)

retrocomputing

4088 readers
16 users here now

Discussions on vintage and retrocomputing

founded 1 year ago
MODERATORS