52
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 07 Apr 2026
52 points (100.0% liked)
Technology
42677 readers
397 users here now
A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.
Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.
Subcommunities on Beehaw:
This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.
founded 4 years ago
MODERATORS
uhhh...do you have any idea how much effort would be involved in maintaining a fork of the Linux kernel, just to preserve 486 support?
it's not.
it's a vanishingly small install base, because of how slow and limited those chips are. the 486 had a whopping 1.2 million transistors. compare that to the big list on this wikipedia page. a few that stand out:
transistor count isn't an exact proxy for performance, but with those orders of magnitude it puts into perspective just how underpowered that little 486 is going to be, for anything you might try to do with it in 2026.
an original, first-generation Raspberry Pi will absolutely run circles around a 486. same with going to ebay or a local pawn shop / computer refurbisher and buying the absolute oldest/cheapest used laptop you can find.
for people who already have 486s and really want to keep them going, the current Debian release still supports 486, and it's supported until 2028 - meaning you have 2 more years of continuing to receive security updates and theoretically being safe to connect it to the internet.
and even after that, FreeBSD has "tier 2" support for 386 and higher, and NetBSD supports it as "tier 1"
and of course, nothing stops anyone from running an old kernel on their old hardware.
For reference, that means the 486 has maybe as many transistors as the board that runs my 11-year-old 3D printer firmware, and that was considered something between the "absolute bare minimum" and "honestly kinda underpowered" at the time I bought it. The only thing that board does is run some loops that send basic signals to some stepper motor drivers, and some basic-ass "bang-bang" style heat control. The actual heavy lifting of organizing and sending the position controls line by line is done by a Raspberry Pi.
Even i386 felt pretty speedy when compared to 8 MHz 68k.
Yes. It was speedy enough to merit a "Turbo" button to slow it down to a reasonable speed!
I would really want to know what kind of a use-case results in using a 386 or 486 computer in 2026 in such a manner that not being able to install the latest kernel updates would in any way be an actual issue.
Anything you still need a 486 for outside of hardware edge cases is handled far better and faster by a Pi Zero W, at a fraction of the power envelope. Thing is, they won't be running Linux in that case, given vendor lock-in.
Sometimes, the issue is certification, e.g. for aerospace and medical applications - although these systems tend to run on decades-old software anyway (since changes to the software also need to be certified, which rarely happens), so it's not like this has an actual impact.