64
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 18 Oct 2025
64 points (100.0% liked)
Linux
59037 readers
640 users here now
From Wikipedia, the free encyclopedia
Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).
Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.
Rules
- Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
- No misinformation
- No NSFW content
- No hate speech, bigotry, etc
Related Communities
Community icon by Alpár-Etele Méder, licensed under CC BY 3.0
founded 6 years ago
MODERATORS
There are many good answers here already, just wanted to add to it.
It sounds very much like what you’re seeing could be either a driver fault or a memory-related issue. Both can manifest as hard system freezes where nothing responds, not even Ctrl+Alt+Fx or SysRq. You mentioned this briefly before, and that still fits the pattern.
If it’s a driver issue, it’s often GPU or storage related. A kernel module crashing without proper recovery can hang the whole system—especially graphics drivers like NVIDIA or AMD, or low-level I/O drivers handling your SSD or SATA controller. Checking dmesg -T and journalctl -b -1 after reboot for GPU resets, I/O errors, or kernel oops messages might reveal clues.
If it’s memory pressure or the OOM killer, that can also lock a machine solid, depending on what’s being killed. When the kernel runs out of allocatable memory, it starts terminating processes to free RAM. If the wrong process goes first—say, something core to the display stack or a driver thread—you’ll see a full freeze. You can verify this by searching the logs for “Out of memory” or “Killed process” messages.
A failing DIMM or a bad memory map region could also behave like this, even if Windows seems fine. Linux tends to exercise RAM differently, especially with heavy caching and different scheduling. Running a memtest86+ overnight is worth doing just to eliminate that angle.
If your live USB sits idle for hours without freezing, that strongly hints it’s a driver or kernel module loaded in your main install, not a hardware fault. If it does freeze even from live media, you’re probably looking at a low-level memory or hardware instability.
The key next steps:
Check system logs after reboot for OOM or GPU-related kernel messages.
Run memtest86+ for several passes.
Try a newer (or older) kernel to rule out regression.
If it’s indeed a driver or OOM event, both would explain the “total lockup” behavior and why Windows remains unaffected. Linux’s memory management and driver model are simply less forgiving when something goes sideways.