24

I'm thinkin about getting one of those ruby nozzles for my printers to basically be able to print anything without ever having to worry about a degrading nozzle. I've seen quite a few videos about it, but I still don't know two things:

  • Given the surrounding material is brass and only the tip being out of ruby, doesn't the filament path where the molten filament gets pushed through still wear out over time (heavily so with CF or GF filament)?

And also

  • How good are the cheaper ones, specifically the "DUROZZLE" one (since that's the one I could find that's 0.6mm and cheap)?
you are viewing a single comment's thread
view the rest of the comments
[-] frezik 6 points 21 hours ago

Durozzle is just a brand name slapped on some Chinese manufacturer. It's probably fine, but I doubt anybody is going to come out raving about it compared to everything else on Amazon.

IIRC, rubies are great at handling abrasive filaments, but they lack accuracy. Been a while since I looked into them, though. I use abrasive filaments so seldom that I can consider a cheap nozzle to be a disposable part of the project. Metal is generally one of the easier things to recycle.

this post was submitted on 02 Oct 2025
24 points (100.0% liked)

3DPrinting

19880 readers
69 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago
MODERATORS