54
What are your favorite open source 3D printers?
(kbin.earth)
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 14 Sep 2025
54 points (100.0% liked)
3DPrinting
19880 readers
26 users here now
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
founded 2 years ago
MODERATORS
I've built a 0.2 and a 2.4 from kits and they're great printers with loads of mods available, but I find them had to recommend unless you have the ability to print your own parts. You can buy a kit that comes with the printed parts or get them through the print it forward program, but if you break any of the parts during the build, it can be challenging to source a replacement.
If you do build one and don't have access to another printer, I would recommend printing replacements for the most critical components once you get it running (especially the hot end parts).
Otherwise, they're super fun projects and I can't recommend them enough.
I built a cardboard enclosure around my poor old i3 clone to get my Voron parts printed. It was a bit janky, but it worked and I can now say that my i3 clone can totally print ASA.
But agree that not having an existing printer at all does make for a potentially harder build, especially as figuring out all the parts you'll actually need ahead of time can be somewhat challenging.