Hi! I've never built a NAS before and only one custom gaming PC, so I'd love if any of you more experienced folks could take a look at my parts selection and possibly suggest better options.
Of course first my use cases:
- Nextcloud
- Immich
- Jellyfin
- Possibly more, similar to the above
Planning on using Truenas with a Raidz (1? - 1 disk failure tolerance) and running most of my stuff in Docker containers. The amount of users will likely stay at or below 3, certainly at or below 5, so it doesn't need to handle that much.
Here's my parts list:
- CPU: AMD Ryzen 5 Pro 4650G
- iGPU, power efficient, AM4 so cheaper, performant enough (I think)
- Case: Jonsbo N3
- This is the component I started with, since I really like the form factor. It did limit my choice on motherboards heavily though.
- Motherboard: Gigabyte A520I AC
- I was trying to go for one with ECC memory support, but at least on pcpartpicker I struggled to find ones at this form factor supporting it. However from reading through Forum threads ECC isn't critically important for a more "casual" build like mine, just a nice-to-have.
- Memory: Found about 16GB of DDR4 in my old pc, they worked before so I didn't bother looking at them in detail
- Cheap
- Storage:
- OS: Western Digital Black SN770 1 TB M.2-2280
- Where I live the 500GB version is actually more expensive
- Cache: Samsung 870 Evo 500 GB
- Cheap enough, although if I can combine this with the OS drive, then even better
- Primary Storage: 4x Seagate IronWolf Pro 8TB (ST8000NT001)
- I have to admit, I can't recall why I settled on these. 8TB seemed good for price-to-size and I didn't want the server ones despite them actually being cheaper because they're extremely loud apparently, but why Pro and not non-pro and why this exact model... I can't recall, I just remember having a headache that afternoon TwT
- OS: Western Digital Black SN770 1 TB M.2-2280
I realize I left out the cooler and psu as I don't think they're particularly relevant here, I can deal with those myself. Price-wise, I am going by German prices and parts availability. On any of the parts listed, or if I forgot anything else though, I would love advice on the quality of my decision and how to improve it, thanks <3
This is way overkill for these applications. A low end mobile Intel processor will do all these things well and use much less power.
I run all of this and much more on an N100.
As someone with an n100, I did have to spend on an apple TV to have a hardware accelerated client for some of the harder to transcode content (h265 4k at higher bit rates). N100 will absolutely choke on some of those even with hardware acceleration enabled.
I think it is the curse of having to big of budget
Start small and cheap before working up (if needed)