127

This is PETG, one was left out in about 40% humidity the other was dried to about 20%

you are viewing a single comment's thread
view the rest of the comments
[-] floquant@lemmy.dbzer0.com 1 points 1 week ago

Place the spool on the bed set to 60-80°C, then put an empty filament box that's missing the bottom side (when flat) on top of it. Place silica, make some holes on the top side. Some youtuber made tests and this method lands pretty nicely in between low-end and high-end dedicated dryers

this post was submitted on 17 Aug 2025
127 points (100.0% liked)

3DPrinting

19520 readers
241 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago
MODERATORS