112

Early studies show that 3D printers may leave behind similar toolmarks on repeated prints.

you are viewing a single comment's thread
view the rest of the comments
[-] NuXCOM_90Percent@lemmy.zip 4 points 1 month ago* (last edited 1 month ago)

The reality is that the markings left on bullets aren't as unique as NCIS would have you believe. A lot of them DO change over time (or even just field stripping a gun).

But the key is that in those first N hours/days, it can be some very substantial evidence. 9 mm round was left embedded in the politician and the chief suspect has ten 9 mm PCCs? Let's test all ten of those and see if we get a match. And so forth.

In that case: Assuming this holds true (I read the article a few days ago and it is currently very hazy), the same could be done with 3d printers. Ghost gun used in a case and the suspect has a 3d printer? Well... checking the print logs is probably still easier. But one could imagine a world where there is a court order to print a special benchy to compare tooling marks.

And... much like with guns, someone who is educated can take precautions.

this post was submitted on 19 Jul 2025
112 points (100.0% liked)

3DPrinting

19474 readers
139 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago
MODERATORS