submitted 2 months ago by gedaliyah@lemmy.world to c/homeassistant@lemmy.world

41 comments fedilink hide all child comments

I see a lot of posts about people who like their Zigbee and Z-Wave products. As I'm setting up the hardware in my home, I'm using Wi-Fi products because I already have Wi-Fi. I don't see much difference in price. What is the actual benefit of setting up a separate network for home devices? Is there a reason that I should consider setting up one of these networks?

you are viewing a single comment's thread
view the rest of the comments

[-] pageflight@lemmy.world 3 points 2 months ago* (last edited 2 months ago)

I very briefly tried a couple zwave light bulbs with a USB zwave adapter for Home Assistant, but couldn't get it reliable. I do like the mesh + low power idea though and played around with ZigBee dev boards previously.

I have settled on mostly Tasmota firmware on ESP8266 based devices. Lots of switches (from the CloudFree shop among others), smart plugs, and other devices. I also like to assemble my own sensor/relay boards, which Tasmota is great for. I did have to set a fixed 2.4Ghz channel on one router, and later set "IoT mode" on my Unifi network, to avoid devices falling off the network. I also have flashed most of the devices, but am happy to do that (not so different from uploading an Arduino sketch once you're used to it).

this post was submitted on 07 Feb 2025

31 points (100.0% liked)

homeassistant

13812 readers

75 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world