101
Bambu Lab Responds to Backlash Over New Firmware Update
(3dprintingindustry.com)
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 20 Jan 2025
101 points (100.0% liked)
3DPrinting
16035 readers
242 users here now
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
founded 2 years ago
MODERATORS
Take a week and build a Voron. The kits are super easy to piece together and you end up with an insanely great, reliable printer for a fraction what it should cost. Yes, the build time and initial calibration might take a bit, but mine's been without issue, printing 24h long prints perfectly for over a year now. You don't need to settle for a mediocre built printer if you have the patience to piece together one. Not to mention, since you built the kit, you know how to troubleshoot any issues that pop up much faster than something you pulled out of a box and plugged into the wall.
2x on the recommendation. I've been slowly modding mine for about two years now. I printed the filter and magnetic panels right out of the gate.
Things I wish I did sooner:
Other than wiring breaks, and me goobering my hod end while goofing with it, it's been dead reliable. The printer has 906 hours on it with the longest print clicking in at 25.5 hours.
As someone who is currently building an LDO Voron (Voron 2.4 LDO Rev. D) most of those things are already included (like the Z-end-stop, the NiteHawk and panels)
Unless something has changed, it looks like the LDO kits still come with acrylic panels? ACM panels are an aluminum, plastic, aluminum sandwich. You cant see through them. I also didn't see the sex bolt or door.
Enjoy the build! The LDO kits are a solid base to start from.
Thanks, yeah following the voron guide was straight forward but the LDO documentation was a bit getting used to. Some things were poorly explained while others were not mentioned at all (like the LED light assembly) but by far better than having to source everything on my own.
Thanks for this insight! Thanks to everyone that replied really. I'm good with building, just hate endless tweaking and tuning. Will research Voron.
There's no need to tweak and tune. I am in the camp of having a printer to print things, vs endlessly tune the printer, and my Voron is set it and forget it at this point. There are some mods worth going after for quality of life, but none are really necessary. I put a list into another reply to the person you just replied to.