20
Help with an old Intel NUC model D54250WYB (sh.itjust.works)
submitted 5 days ago by nemo@sh.itjust.works to c/selfhosted@lemmy.world
8 comments fedilink hide all child comments

Hey everyone, I've been self hosting a few things on a raspberry pi like board and wanted to upgrade to a mini PC. I got my hands on an old Intel NUC model D54250WYB but it had no memory or storage, not even an enclosure. I bought some RAM and a power supply but the SSD I was planning to use wasn't compatible (physically) and I didn't install it.

I tried powering it on but I only get a Standby LED when I plug it in. Pressing the power button doesn't do anything as far as I'm aware. There's supposed to be a second LED that turns on to show that the computer is ON. I have an Ubuntu installer USB that should work that I plugged in but nothing changes when I plug it in. Also, the board heats up when plugged in so I assume it's doing something?

I was planning on temporarily using an SD card or USB until I made sure the computer works so I don't spend money in vain.

My question is: Could it be that the missing internal storage is preventing the computer from booting? If not, could it be that something is shorted/doesn't work anymore? Has anyone had experience with this model? From what I found it was released in 2013 so it's relatively old now.

TLDR: Intel NUC without SSD storage but with only a usb won't boot. Is it the missing SSD fault?

Thanks in advance :)

you are viewing a single comment's thread
view the rest of the comments
[-] nemo@sh.itjust.works 1 points 4 days ago

Yeah I think my next attempt is gonna be to get a keyboard connected and mess around. But wouldn't the computer LED turn on too even if it just boots to bios? Or does the power on LED typically only turn on when the OS is properly rubbing?

[-] Cenzorrll@lemmy.world 2 points 4 days ago

I would think that the power led would be on if there's power going through the motherboard.

Are you referring to the power led or the disk usage led? I think on my nuc the only other led is the disk usage one, which looks like a soda can. The power led is always on, but doesn't indicate standby or operating as far as I've seen.

[-] nemo@sh.itjust.works 1 points 4 days ago

There's a total of 3 LED on mine, I'm probably seeing an extra one cause I don't have an enclosure on it. I checked the manual and the only one that's on is the "standby" LED that's supposed to show that there's power going through the board.

The disk usage and normal "power on/off" LED are off. And I haven't managed to get them to do anything so far.

this post was submitted on 11 Nov 2024
20 points (100.0% liked)

Selfhosted

40183 readers
424 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules:

  1. Be civil: we're here to support and learn from one another. Insults won't be tolerated. Flame wars are frowned upon.

  2. No spam posting.

  3. Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it's not obvious why your post topic revolves around selfhosting, please include details to make it clear.

  4. Don't duplicate the full text of your blog or github here. Just post the link for folks to click.

  5. Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).

  6. No trolling.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

founded 1 year ago
MODERATORS
ruud@lemmy.world
Loki@lemmy.world
CannaVet@lemmy.world
devve@lemmy.world
HybridSarcasm@lemmy.world
HybridSarcasm@lemmy.hybridsarcasm.xyz