[-] eco_game@discuss.tchncs.de 104 points 2 months ago

I like your spirit, but I don't think a Chinese equivalent to Google Play Services would be more desirable

12
submitted 2 months ago* (last edited 2 months ago) by eco_game@discuss.tchncs.de to c/oldhammer@lemmy.world

I found these figurines in my grandma's attic, a friend told me to ask about them here. I assume they're from roughly 1990 - 1995.

I also found these receipts next to them:

My main questions are:

  1. (Which figurines are these?)
  2. Are they still worth anything?
  3. If yes, any tips on where to sell them? (I'm based in Germany)
32
[-] eco_game@discuss.tchncs.de 49 points 7 months ago

I was pretty neutral towards Ubuntu, up until an automatic system update removed my deb Firefox and replaced it with the snap version, even though I specifically set the apt repo to a higher priority.

The entire reason I left Windows is because I don't want (for example) Edge shoved down my throat after every update, and yet Ubuntu has gone and done the exact same thing with snaps.

After literal hours of fighting, the only solution I found was to fully disable automatic updates. With Pop OS I have all the benefits of Ubuntu, but I also get a company (System76) that does cool stuff and doesn't try shoving snaps down my throat.

[-] eco_game@discuss.tchncs.de 24 points 10 months ago* (last edited 10 months ago)

What worked for me at my old school was using a ShadowSocks proxy. ~~Basically what this does, is it takes all your traffic and just makes it look like random https traffic (AFAIK).~~ ShadowSocks is just a proxy. The description fits the Cloak module, mentioned below.

I believe multiple VPNs support this, for me with PIA VPN it's in the settings under the name "Multi-Hop" (PIA only supports this on the Desktop App, not on mobile).

This technique is pretty much impossible to block, unless you ban every single VPN ShadowSocks Proxy IP. If that is the case for you (chances are practically 0), you could also selfhost ShadowSocks in combination with the Cloak module, however this method is a lot more complicated.

[-] eco_game@discuss.tchncs.de 29 points 1 year ago

I just read the full article, and I'm not even that concerned about storing the key in plaintext. I find the possibility of copying the files, and then being able to run the same session simultaneously a lot scarier.

[-] eco_game@discuss.tchncs.de 27 points 1 year ago

If your hate only goes towards touchscreens and not having physical buttons, Mazda is (or at least was) very anti-touchscreen. I haven't done any research on their current stance or if they have good EVs, but a neighbor of mine was really happy with his Mazda ICE car for having a button for everything.

[-] eco_game@discuss.tchncs.de 27 points 1 year ago

In that case you can try adding before:2023 or similar to your search

20
submitted 1 year ago* (last edited 1 year ago) by eco_game@discuss.tchncs.de to c/android@lemmy.world

Hey everyone, I'm looking for a driving journal app, to track when, to/from where and which distance I drive.

Ideally I'd like for it to be FOSS, but if there are decent Closed Source apps I'm ok with it too (I'd just block Network Access in Graphene OS then).

This post (not mine) has pretty much my ideal criteria, but sadly didn't get any answers: https://softwarerecs.stackexchange.com/questions/88349/drivers-logbook-app-for-android-foss

Unlike the above post, I don't want this for tax purposes etc., but rather just to understand where all my distance driven comes from.

Edit: I've done some more research and haven't found anything, for now I'll just use an OnlyOffice spreadsheet. If I find the time, I might try developing an app for this at some point.

Edit 2: After developing my app for a week and then showing it to a friend, he instantly found exactly what I was working on...

https://play.google.com/store/apps/details?id=com.liefers.driverslogpro

[-] eco_game@discuss.tchncs.de 31 points 1 year ago

It's not decentralized, everyone connects to one central server.

[-] eco_game@discuss.tchncs.de 25 points 1 year ago

I will once again shill for Proxigram (not my project), the only? remaining FOSS instagram frontend. You can try it out on one of the public instances.

I'm not entirely sure if it supports opening Instagram links though.

1

cross-posted from: https://discuss.tchncs.de/post/13702771

Beware of used Pixels with a replaced screen

I very recently bought a used Pixel 6 with a replacement screen, not thinking too much of it. I even made sure that the screen looked good during pickup.

One thing I missed though, was that apparently my Pixel doesn't have a fingerprint sensor anymore. I did some research, apparently it's quite easy to break the fingerprint sensor (or some places simply just don't include a sensor in the repair?) when replacing the screen.

Today I also noticed (through Show refresh rate in developer options) that my screen will only do 60 Hz as well.

Also I have stupidly high battery drain, I'm not 100% if that's related though.

Long story short, learn from my mistakes and either don't buy a used phone with a replacement screen or carefully test all functionalities associated with the screen, mainly high refresh rate and the fingerprint sensor.

33
submitted 1 year ago* (last edited 1 year ago) by eco_game@discuss.tchncs.de to c/googlepixel@lemmy.ml

I very recently bought a used Pixel 6 with a replacement screen, not thinking too much of it. I even made sure that the screen looked good during pickup.

One thing I missed though, was that apparently my Pixel doesn't have a fingerprint sensor anymore. I did some research, apparently it's quite easy to break the fingerprint sensor (or some places simply just don't include a sensor in the repair?) when replacing the screen.

Today I also noticed (through Show refresh rate in developer options) that my screen will only do 60 Hz as well.

Also I have stupidly high battery drain, I'm not 100% if that's related though.

Long story short, learn from my mistakes and either don't buy a used phone with a replacement screen or carefully test all functionalities associated with the screen, mainly high refresh rate and the fingerprint sensor.

12
Samsung Gear VR sublemmy (discuss.tchncs.de)

I recently got a Samsung Gear VR and noticed that even though there is a moderately sized subreddit for it, it doesn't have a lemmy presence, so I decided to fix that:

Gear VR

!gearvr@discuss.tchncs.de https://discuss.tchncs.de/c/gearvr

The community is for anything regarding Gear VR, be it asking questions, guides for making stuff work, maybe showing off a good deal you got, ...

[-] eco_game@discuss.tchncs.de 24 points 1 year ago

Looks like it might be coming back as suyu

24
submitted 1 year ago* (last edited 1 year ago) by eco_game@discuss.tchncs.de to c/linux@lemmy.ml

I'm trying to find a way to stream my monitor to Apple TVs in my school via AirPlay. I've already done some research and it seems like there are currently no software solutions, with the closest one being openairplay, however it seems to be pretty dead.

I "need" AirPlay, as my school only uses Apple TVs, and it's quite inconvenient to always bring my HDMI cable and have to hook up to projectors that way.

I'm also open to more scuffed solutions, as I won't be going to that school for much longer. Some things I have thought of so far are:

  1. Using my old iPhone 6 (maybe jailbreak it, I don't think that matters here though) and something like deskreen to first cast my laptop screen to the iPhone and then AirPlay from there. I'd expect this to work, but it wouldn't be much less cumbersome than just using HDMI directly, and it would also mean having to carry that iPhone and a charging cable for it with me all the time.
  2. Using a Mac OS virtual machine with something like OSX-KVM, then possibly buying a WiFi card with AirPlay support and passing it through to the VM in combination with a similar deskreen solution as in 1. This also seems pretty complicated, and I'm not even sure if it would work at all.

Does anyone here have any experience with this, know of any better solutions (I'm also open to more scuffed solutions), or maybe even tried one of my scuffed methods already?

26
submitted 2 years ago* (last edited 2 years ago) by eco_game@discuss.tchncs.de to c/techsupport@lemmy.world

This isn't a question but rather a solution to a problem I couldn't find anywhere online, apologies if this is the wrong community.


If you have a Lenovo laptop (in my case a T14 thinkpad) and your display dims after about 30 seconds, no matter what you specify in Windows settings, you might have to disable the "Zero-Touch-Lock". You can do this in the Lenovo Vantage Software (in my case called "Lenovo Commercial Vantage") in the menu "Smart Assist".

[-] eco_game@discuss.tchncs.de 26 points 2 years ago

Proxigram is like bibliogram. You can use one of their public instances

[-] eco_game@discuss.tchncs.de 23 points 2 years ago

This could be a long shot but if it's a Samsung Galaxy Tab S, the battery connector solder joints kinda die after a while, which can either be fixed by reflowing them or by applying pressure (I have a tablet with that issue). You could try pressing on the battery connector and see if it works then.

[-] eco_game@discuss.tchncs.de 31 points 2 years ago

Most mobile devices won't work without batteries. The best way to work around this is to supply it with 4.2V (anything between 3V and 4.2V will do) over the battery connector.

view more: next ›

eco_game

joined 2 years ago