overview for Sakowuf

3 Day Ban from Reddit by Sakowuf_Solutions in c/flashlight@lemmy.world

[-] Sakowuf_Solutions@lemmy.world 3 points 1 year ago

Social media platforms are weird.

5

submitted 1 year ago by Sakowuf_Solutions@lemmy.world to c/flashlight@lemmy.world

0 comments fedilink

Convoy S21A with P2500 buck driver and KD full spectrum pink 10W 5050 emitter.

Fun little light, but a little off in that the Vf of the emitter is 4V on high but it didn’t play well with the convoy buck/boost driver…. So I went with a buck. Use 2x 18350 to get well regulated performance or 1x 21700 for convenience and runtime but experience voltage sag.

Either way it’s a fun light that throws well for an S21A.

SW LED Spectra by Sakowuf_Solutions in c/flashlight@lemmy.world

[-] Sakowuf_Solutions@lemmy.world 3 points 1 year ago

Is the ZWB3 glass.

Are there any boost driven soda cans? by Sakowuf_Solutions in c/flashlight@lemmy.world

[-] Sakowuf_Solutions@lemmy.world 6 points 1 year ago

Convoy 3x21b too

6

SW LED Spectra (lemmy.world)

submitted 1 year ago by Sakowuf_Solutions@lemmy.world to c/flashlight@lemmy.world

7 comments fedilink

A super user took an emission spectra of one of the LEDs I use. Interesting data for sure!

Well, that's not supposed to happen... by Sakowuf_Solutions in c/flashlight@lemmy.world

[-] Sakowuf_Solutions@lemmy.world 6 points 1 year ago* (last edited 1 year ago)

Ooh yeah that’s a goner. I wonder what happened. Usually it takes a lot of extended heat to do that and that would be hard to do given the way hank sets up his lights.

It could be anything from a driver fault to a short. Just replacing the led won’t be sufficient.

SP36… in pink! by Sakowuf_Solutions in c/flashlight@lemmy.world

[-] Sakowuf_Solutions@lemmy.world 2 points 1 year ago

I’m thinking those green indicator LEDs need to be purple…

SP36… in pink! by Sakowuf_Solutions in c/flashlight@lemmy.world

[-] Sakowuf_Solutions@lemmy.world 7 points 1 year ago

Weird color? Check

Overkill? Check

Borderline useless? Check

Low skill? Check

Right up my alley.

SP36… in pink! by Sakowuf_Solutions in c/flashlight@lemmy.world

[-] Sakowuf_Solutions@lemmy.world 6 points 1 year ago

Pretty straightforward. The driver is glued in, so I used debonder and pushed the driver out by pushing on the top of the driver through the switch hole with some needle nose pliers.

19

SP36… in pink! (lemmy.world)

submitted 1 year ago by Sakowuf_Solutions@lemmy.world to c/flashlight@lemmy.world

9 comments fedilink

I swapped out the stock emitters in an SP36 for 4 3535 sized pink emitters from KD. The output of the SP36 is pretty well matched to the pink emitters, except turbo won’t be available at a battery voltage of 3.6ish.

Not perfect but still fun. 👍

Well that’s certainly pink by Sakowuf_Solutions in c/flashlight@lemmy.world

[-] Sakowuf_Solutions@lemmy.world 3 points 1 year ago* (last edited 1 year ago)

I’ve got 5 5050 and 20 3535. I’m more than happy to send you some at cost if you’re interested. I've also got a big 9090 sized blue emitter that I don't think I'm going to use if you're interested.