773
submitted 1 year ago* (last edited 1 year ago) by Steamymoomilk@sh.itjust.works to c/technology@lemmy.world

So my mother recently bought an ET-2800, By HP we had an HP printer before and we got a new one because the old one would not work with my sister's Windows 11 Laptop. So I had to set it up for my mother, the manual said you can use it without the app. But there was no way to physically do that. Anyway, I downloaded the app on my phone (android) and the app would not connect to the printer. So I used my mother's iPhone and it would connect. The setup process was stupid proof. And after I got it all full of ink, it was very painless. However, this is where the H in HP should stand for HELL. Because a few months go by and my sister and my mother need some papers printed. No problem. I thought to myself, so my sister tried to print it wirelessly. Couldn't find the printer, I said ok maybe it's a dumb driver, USB didn't work either. I asked my sister to send it to me, so I can print it on my w540 running rocky 9. Rocky picked up that I needed drivers and installed them. Wireless didn't work but wired showed up, I thought sweet I can just print the paper and get back to what I was doing. However, when I clicked print, the printer would grab the paper and run it though but not put ink on the paper. My mother asks me to forward the email to her to try to print it on her phone. I send it, and it prints, and the paper come out how it should with ink and the paper is finally printed.

After this experience with this printer, it makes me rather aggravated at this purchase, and no longer want to buy from HP. I have looked at Brother printers and there are no Proprietary ink cartage, and or laser printers. I purely wanted to talk about my experience with HP printers and would like to know what others have for a printer for recommendations, for when eventually HP kills support and makes it a paper weight, I've read many negative experiences with HP printer, specially from Lois Ross man and their anti consumer products.

(page 2) 50 comments
sorted by: hot top controversial new old
[-] ccunix@lemmy.world 10 points 1 year ago

Laserjets up until generation 5 were amazing. There are laserjet 4s still trucking away churning out pages. I personally had a LaserJet 4MP that I sold when I got married due to its extremely low wife acceptance factor (it was huge, loud and ugly. We both regret that decision because 20 years later it would probably still be working.

Basically, what Brother lasers are now is what HP laserjets used to be up until ~2004. We can debate the exact switchover year ad nauseum, but you get the idea.

load more comments (1 replies)
[-] zquestz@lemm.ee 10 points 1 year ago

Simple answer, ages ago there was a time when HP made okay printers. In the past decade or more, they have not. Stay away.

The bloatware and software stack is just abysmally bad.

[-] gearheart@lemm.ee 10 points 1 year ago

Yeah it's bad .... Now many hp printers require Internet connectivity and an active subscription for you to be allowed to use the ink you purchased.

load more comments (2 replies)
[-] Grass@sh.itjust.works 10 points 1 year ago

Inkjet has been garbage since day one. Get a brother laser, use Noname toner from your local ink shop, be happy and never tinker with a paper printer again.

Eventually 2d printing with a 3d printer will be better than inkjets. Except not really. I'm kinda surprised I haven't heard of any open source paper printers.

load more comments (2 replies)
[-] RanchOnPancakes@lemmy.world 9 points 1 year ago

Yes. Ever since we left behind parallel ports and drivers that could fit on a single floppy.

load more comments (1 replies)
[-] Aloha_Alaska@lemmy.world 9 points 1 year ago

Well yeah, I mean not always but for probably 20 years their laser printers have been terrible, and their inkjets have been not consumer friendly for even longer than that.

For instance, I once had an HP color laser printer that was designed in a way that toner dust would build up on the prism and mirror, causing streaks and splotches to be printed on the page. The official recommendation was to buy a new printer, and the local repair shop said is it even though it’s a known issue and they’re capable of fixing it, getting it apart and putting all the pieces back together is such a time consuming hassle that it would be just as cheap to buy a new one. A $300 color laser printer. If I did it successfully, I would need to do it again in a year or two anyway. I now have a Brother; it’s black and white only but has been rock solid.

I did see on The Other Site a discussion from a year or two ago that Brother isn’t so great anymore, but the consensus seemed to be that they’re still better than anything other than maybe those Epson printers with the ink reservoirs.

I remember that my high school, college, and first couple of jobs had amazing HP laser printers, but sadly those days are gone and the company is a shell of what it used to be. I would not buy an HP printer at this point.

Sorry for your suffering but welcome to the club.

load more comments (1 replies)
[-] Semi-Hemi-Demigod@kbin.social 8 points 1 year ago

HP's inkjets have always been cantankerous, but the business printers they made in the late 90s were tanks.

Once upon a time, Hewlet Packard (HP) made great kit. Unfortunately that hasn't been true for at least the last 15 years. Nowadays everything they make, that I've looked at, seems to be utter trash. Brother is currently a good brand for printers if your in the market for one though.

load more comments (2 replies)
[-] stewie3128@lemmy.ml 7 points 1 year ago

I've only bought Brother laser printers for 15 years now, and have no intention of doing anything else. Never again, HP.

[-] Paradox@lemdro.id 6 points 1 year ago

No. They used to be extremely good

[-] super_user_do@feddit.it 6 points 1 year ago

I have an HP Printer and it sucks. It deliberately decided not to print anymore if I don't pay them 3,99€ a month

[-] sagrotan@lemmy.world 6 points 1 year ago* (last edited 1 year ago)

I remember a needle printer from my work in the early 90s that worked endlessly. I think it was from the early 70s.

[-] CyberTaco@lemmy.world 6 points 1 year ago

The HP LaserJet 4 series was their last good printers. They were discontinued in 1995, and everything from them has been utter shit since. You mentioned you were looking at Brother printers - go for it, they make good printers.

load more comments (1 replies)
[-] cows_are_underrated@feddit.de 6 points 1 year ago

We have bought a HP printer about maybe 7-8 years ago(don't know the model) and it just works. No annoying drivers, no "can't do shit because of low ink" and you can even use non HP ink cartridges. The only problem is, that sometimes the scanner doesn't work properly so that the document is literally unreadable. After cleaning the scanner glass 7 times it may work. Luckyly this doesn't happens very often.

load more comments (1 replies)
[-] RememberTheApollo_@lemmy.world 6 points 1 year ago* (last edited 1 year ago)

They went to shit when they switched to a massive, bloated shitty software and driver package instead of just drivers. Wish I could remember what year that was, but it was like a 500MB download. I think remember I saw the package was over 1GB at one point. To run a f’n printer. And of course it was shitty. Connection problems, wouldn’t print when you sent the job, shitloads of useless tools that constantly wanted you to buy or subscribe to printer ink sales, etc. They made the driver harder and harder to find and pushed their bloatware.

Now you can find just the driver, 81MB or so, but they’re fucking with you over printer ink by trying to prevent you from refilling with 3rd party ink, using 3rd party cartridges, making it so you can’t print just black if you’re out of other colors, etc.

load more comments (3 replies)
[-] ChillPill@lemmy.world 6 points 1 year ago

I'm not even going toreadd your post. Not to be rude, but becuase: 1) yes, HP is that bad. And 2) buy a Brother laser printer.

[-] NENathaniel@lemmy.ca 6 points 1 year ago

Anyone have printer brand recommendations?

I have a Brother and like it but, is that he only decent option?

[-] ji88aja88a@lemmy.world 8 points 1 year ago

I have an Epson ecotank.. you pay upfront for the printer and on the flipside the ink is about $15AUD per bottle..but that will get you 5000 sheets.

load more comments (1 replies)
[-] NateNate60@lemmy.world 5 points 1 year ago

I have an Epson EcoTank printer. It's a colour inkjet printer but it came with these ginormous bottles of ink that you pour into a tank. I've printed thousands of pages for three years and I still have around a quarter of the included ink left.

I didn't need to install any drivers on Linux or Windows, just adding the printer was enough. It connects to your WiFi network and works as expected. My only complaint is that after not using it for a few weeks, you'll need to run the "clean print head" utility on the printer and might need to realign the print heads. But other than that, it's great. Photo quality is pretty meh though.

[-] Kerrangutan@lemmy.one 6 points 1 year ago

I have two EcoTank printers, one is set up with normal ink and the other one gets used by my partner for sublimation printing for her crafting projects, they're absolutely the next best thing to a laser printer.

load more comments (16 replies)
[-] rbos@lemmy.ca 5 points 1 year ago

LaserJet 4 was a tank. Everything since has been various flavours of mediocre. Buy Brother.

[-] anothermember@lemmy.zip 5 points 1 year ago

Never bought a good printer since 2003. In 2003 I remember you could get a good printer for a reasonable price with reasonably priced cartridges. Ever since then printer technology doesn't seem to have improved but they all seem to have become much worse quality and incredibly scammy.

[-] BabyVi@lemmy.world 5 points 1 year ago

HP = "Have Problems" Stay away from that company's products, that includes everything, not just the printers.

[-] itsraining@lemmy.world 5 points 1 year ago

HP – Hell-Powered

HP printers are just bad. Their Linux drivers (HPLIP) are flimsy and sometimes break on updates. They come with GUI tools still stuck on Qt 4. Their hardware's quality is also pitiful and the marketing approarch is outirght evil. I got an Envy printer recently (not my choice). It came with instructions to set it up via cloud with an HP account. Why shouldn't I be able to use a damn printer without creating yet another useless account and giving out personal information is beyond me. At last I discovered the USB port (covered by a sticker which had the word USB crossed out) and managed to set up the printer after the fifth attempt or so, because CUPS didn't recognize it and so didn't the HPLIP setup tool. And then the next time I tried to use the printer it just refused... Then I gave it away because my patience had finally run out. Don't mess with HP if you value your time and nerves.

load more comments (1 replies)
load more comments
view more: ‹ prev next ›
this post was submitted on 22 Oct 2023
773 points (100.0% liked)

Technology

60042 readers
2435 users here now

This is a most excellent place for technology news and articles.


Our Rules


  1. Follow the lemmy.world rules.
  2. Only tech related content.
  3. Be excellent to each another!
  4. Mod approved content bots can post up to 10 articles per day.
  5. Threads asking for personal tech support may be deleted.
  6. Politics threads may be removed.
  7. No memes allowed as posts, OK to post as comments.
  8. Only approved bots from the list below, to ask if your bot can be added please contact us.
  9. Check for duplicates before posting, duplicates may be removed

Approved Bots


founded 2 years ago
MODERATORS